Fast Speed Screw Locking Machine With Automatic Screw Feeder

Intro:

RS-L680 is a Screw Locking Machine With Automatic Screw Feeder . It has automatic feeding system, Once the screwdriver is lifted after locking a screw, another screw will be sent continuously to continue the operation,this can greatly improve the efficiency.

The screw locking and feeding machine include 3 parts: 1.Screw feeding system. 2. Screw sorting system. 3. Screw locking system.

These 3 systems are controlled by the machine's program.

Suitable:

1. b>=1.3* D
2. Screws should be M2 to M6. 2mm<=d<=6mm
3. 3.5mm<=D<=11mm (D can be Max20mm. It should be better within 3.5-11mm.)

Specification:

Screw feeding and locking machine parameters

Features:

1. Automatic screw feeding, sorting and locking for various shapes screws. One-hand operation.

2. Torsion precision and convenient adjustment, ensure the quality of screw locking

3. Turbine feeding, low volume and noise, convenient maintenance. Light weight and small, mobility and save space.

4. Warning function when lack of screws.(Acousto-optic alarm)

5. High efficiency. No need to pick up screws, move screws and put screws. Just need to lock the screws aimed at the screw hole.

6. Sensor controls screws feeding one by one to avoid feeding repetition.

7. Can lock screws very fast, around lock 60 screw per minute.

Working conditions:

1, Screw specification requirements:
The screw length should be over 1.3 times greater than the screw cap’s diameter.

If the screw cap is greater than the screw length, the screw cap may come out first, because the screw will turn over during feeding screws.

The screw length should be less than 45mm.

Picture of Fast Speed Screw Locking Machine With Automatic Screw Feeder