YS-100 Automatic Soft PVC Tubing Cutting Machine For Max 13MM OD Tubes

Intro: 

Automatic Soft PVC Tubing Cutting Machine can cut soft tubes with max 13MM OD. However if tube is very hard or wall thicknes is big, our YS-100W with bigger motor and drive can work.

• YS-100: For cutting tubes with max 13MM OD     250W power machine
• YS-100W: For cutting tubes with max 13MM OD  500W power machine
• YS-120WH: For cutting tubes with max 25MM OD 500W power machine

Suitable:

This machine can cut kinds of soft tubes,  such as PVC tubes, shrink tubes, rubber silicone tubes, fiberglass tubes, Also it can cut wires, velcro,elastic, nickel strip, PV ribbons, etc.

Cut length: 0.1-9999MM adjustable

Parameters

Features of tube cutting machine

1.High speed: It can cut 100~120 cut per minute. (50mm long)

2.Accuracy: Cut-length is accurate, cut length can be set between 0.1-9999.9mm.

3.Cutting type: Both for cold cut and hot cut. Hot cut suitable for materials that needs hot sealing, such as Nylon webbing, polyester webbing, etc.

4.Automatic operation: It works automatically only by setting length and quantity. Save labor, high efficiency.

5.Automatic stopper: It stops automatically if materials run out during operation

6.Memory: Set-length, set-q'ty & set-speed are not erased even if power off & on

7.Application:The cutting machine is suitable for cutting tubes, cable, webbing/ribbon/belt, small wire, sheet and film, etc.