|
[China]
Trade Verify
Address: Floor 2, Building 2, Ruijing Building, No.868, Jinshan South Road, Mudu Town, Wuzhong District, Suzhou
Contact name:Tian
Jiangsu GIS Laser Technologies Inc., |
|
Verified Suppliers
|
|
|
laser direct imaging (LDI) system solutions HDI PCB
(1) LDI technology adopts laser positioning and vertical laser beam scanning, which can ensure that the graphic position deviation is within ± 5um, which greatly improves the line alignment accuracy and position.
(2) LDI technology does not use negative film, which can meet the production of very high-density fine conductors, improve the qualification rate of fine line PCB manufacturing and avoid repeated positioning defects.
(3) LDI technology does not need to manufacture, preserve and maintain photographic film devices, consumed materials, energy, other auxiliary materials, and chemicals, which reduces the production and processing cost.
(4) LDI technology can shorten the PCB manufacturing process, reduce the turnaround time, improve the rapid response-ability, reduce the intervention of human factors, simplify the operation process, and then improve the production efficiency.
How does laser direct imaging ( LDI ) work?
Laser direct imaging needs a PCB with the photo-sensitive surface
that is positioned under a computer controlled laser. And then the
computer is creating the image on the board with the light of
laser. A computer scans the board surface into a raster image,
matching the raster image to a pre-loaded CAD or CAM design file
that includes the specifications for the necessary image intended
for the board, the laser is used for directly creating the image on
the board.
| Specification/model | DPX230 |
| Application | PCB,HDI,FPC (inner layer,outer layer,anti-welding) |
| Resolution (mass production) | 30um |
| Capacity | 30-40S@18"*24" |
| Exposure Size | 610*710mm |
| Panel thickness | 0.05mm-3.5mm |
| Alignment Mode | UV-Mark |
| Alignment capability | Outer layer±12um；Inner laye±24um |
| Line width tolerance | ±10% |
| Deviation increase and decrease mode | Fixed increase and contraction, automatic increase and contraction, interval increase and contraction, partition alignment |
| Laser type | LD Laser,405±5nm |
| File format | Gerber 274X；ODB++ |
| Power | 380V three-phase alternating current, 6.4kW,50HZ, voltage fluctuation range + 7% ~-10% |
| Condition | Yellow light room; Temperature 22°C ± 1°C; Humidity 50% ± 5%;
Cleanliness level 10000 and above; Vibration requirements to avoid violent vibration near the equipment |
About us
We are an innovative supplier of various PCB laser direct imaging
(LDI) system solutions. Our system product portfolio ranges from
LDI system configurations for high-mix and emerging PCB niche
applications to fully automated LDI system solutions for mass
production environments.
