China Environmental Labeling Certification - commonly known as Ten Ring Certification protect environment

The ultimate purpose of issuing environmental labels is to protect the environment, which is achieved through two specific steps: First, through environmental labels, a message is conveyed to consumers, telling consumers which products are beneficial to the environment, and guiding consumers to purchase and use such products ; The second is to guide enterprises to consciously adjust their product structure and adopt cleaner production processes through consumer choice and market competition, so that enterprises can comply with laws and regulations in environmental protection behavior and produce products that are beneficial to the environment.

1 Household refrigeration appliances Motor-driven compression household refrigerators below 500L
2 Unleaded motor gasoline Fuel for spark-ignition internal combustion engines
3 Recycled paper products Recycled paper and decorative and building materials produced from waste paper
4 Mercury-cadmium-free lead rechargeable batteries Various types of rechargeable batteries
5 Mercury-free dry batteries Various types of dry batteries
6 Insect-proof wool textiles Insect-proof wool textiles
7 Packaging products to replace non-degradable plastic films, bag packaging products and paper-plastic composite packaging products
8 Soft drinks Alcohol-free beverage products
9 Energy-saving fluorescent lamps Self-ballasted fluorescent lamps, single-ended fluorescent lamps, semi-luminaires
10 Energy-saving low mercury double-ended fluorescent lamp tube Double-ended fluorescent lamp tube
11 Energy-saving electronic ballast Independent electronic ballast
12 Children’s toys Toys designed for or clearly intended for use by children under 14 years of age
13 Low-noise washing machines Washing machines (including dehydrators) with a rated washing capacity of 8kg or less
14 Energy-saving, low-noise room air conditioners are household and similar room air conditioners that use a fully enclosed compressor with a cooling capacity of less than 14,000W and are designed to create a comfortable indoor environment.
15 Energy-saving, low-emission gas stoves Stoves, ovens, oven ranges and gas rice cookers using city gas
16 Ceramic, glass-ceramic and glass tableware products Ceramic, glass-ceramic and glass tableware products in contact with drinking water, beverages or food
17 CFC-free industrial and commercial refrigeration equipment All types of refrigeration equipment except household refrigeration equipment and vehicle and marine refrigeration equipment
18 Household microwave ovens Household microwave ovens with a rated voltage not exceeding 250V
19 Asbestos-free building products Various building products (tiles, pipes and insulation materials) that use other fibers to replace asbestos fibers
20 Replacement of haloalkane fire extinguishers ABC dry powder fire extinguishers, AFFF aqueous film-forming foam liquid, CO2 fire extinguishers, water-based fire extinguishers, fire extinguishers made of inert gas, HFC, HCFC and other fire extinguishing agents
21 Phosphogypsum building materials products Various types of gypsum building materials products (except boards) produced with phosphogypsum as the main raw material
22 Ecological textiles All types of textiles and products at all stages such as fibers, yarns, accessories, etc., excluding carpets
23 Non-aluminum pressure cookers Various pressure cookers made of iron and stainless steel as the main materials
24 Safety anti-insect agent Anti-insect agent products for clothing and books produced with camphor or pyrethroids as raw materials
25 Low-radiation color television. Television receiver that accepts color broadcast television signals.
26 Magnetoelectric anti-scale water processor applies the principles of magnetism and electricity for water treatment. Products to prevent scale formation
27 Low-pollution motorcycles are two-wheeled and three-wheeled motorcycles with an engine displacement greater than 50ml and a design speed greater than or equal to 50km/h.
28 Plastic pipes for construction Plastic pipes and plastic-metal composite pipes and fittings for construction replacing cast iron pipes and galvanized pipes
29 Electrostatic copier: A plain paper electrostatic copier that uses dry development and thermal fixation to copy documents and drawings.
30 Substitute products for ozone-depleting substances Various products that replace ozone-depleting substances. Including refrigerants, foaming agents, propellants, cleaning solutions, fire extinguishers, sterilants and other products
31 CFCs-free foam plastics Foam plastic products other than disposable foam tableware
32 Aerosols CFCs-free aerosol products, no insecticide aerosols
33 Recycled plastic products Recycled plastic products produced with waste plastic as the main raw material
34 Disposable tableware Disposable tableware made of biodegradable, photobiodegradable and easily recyclable materials
35 Packaging fiber desiccant Packaging desiccant made of modified plant fiber
36 Light vehicles: Vehicles powered by ignition or compression ignition engines with a design speed of not less than 50km/h
37 Skeet target A skeet handle used in shooting sports
38 Smokeless disc mosquito coils Smokeless disc mosquito coils made of household sanitary insecticides, plant-based powders, carbon powders, adhesives, colorants and other raw materials
39 Solar powered watch A watch powered only by a solar powered battery system
40 Water-based coatings Coatings and related products that use water as solvent or dispersion medium
41 Metal welding and cutting gas Hydrocarbon gas with welding and cutting functions and new metal welding and cutting gas using additives
42 Plastic doors and windows Various types of plastic doors and windows assembled and installed in accordance with unified specifications
43 Microcomputer and monitor Computer host and monitor
44 Sanitary ceramics: washbasins, toilets, bidets, sinks, squat toilets, bathtubs and other sanitary ceramics
45 Telephone (HJ2508-2011) This standard applies to telephones, including wired telephones and mobile telephones.
46 Adhesives: Adhesives for indoor and outdoor building decoration, adhesives for wood processing, adhesives for water-based paper-plastic composite films, adhesives for shoemaking and carpets
47 Lightweight wall panels: gypsum board, fiber reinforced cement board, aerated concrete board, lightweight aggregate concrete strip, concrete hollow strip, fiber reinforced calcium silicate board and composite board, etc.
48 Construction Blocks Construction Hollow Blocks
49 Dry-type power transformer Dry-type power transformer with voltage level below 35KV (including autotransformer)
50 Printers, Faxes and MFPs Office and Home Printers, Faxes and MFPs
51 Air hygiene incense is a hygienic incense product made of Chinese herbal medicine and other natural plant powders.
52 Furniture Interior furniture and accessories, including products that are movable, portable or fixed to walls, products for room furnishings and doors for interior use
53 Wallpaper Wallpaper with paper as base material and PVC as surface layer
54 Footwear: Sports shoes, professional shoes, children's shoes, men's and women's shoes, antifreeze shoes, casual shoes, fashionable shoes and indoor shoes, etc.
55 Solvent-based wood coatings for interior decoration and decoration Suitable for nitro, polyurethane, and alkyd solvent-based topcoats and primers for interior decoration and decoration
56 The nominal diameter of the faucet is DN15, DN20, DN25, the nominal pressure is not greater than 1.0MPa, and the medium temperature is not greater than 90°C. Faucets installed on sanitary facilities such as kitchens and bathrooms, such as ordinary faucets , basin faucet and kitchen washing faucet, etc. This standard does not apply to bathtub faucets and shower faucets.
57 Copy paper Suitable for copy paper used in office equipment such as copiers, printers, fax machines, and all-in-one office machines
58 Ready-mixed concrete Suitable for ready-mixed concrete produced in centralized mixing stations
59 Recycled toner cartridges Suitable for recycled toner cartridges for monochrome and color laser printers, copiers and all-in-one machines
60 Cabinets Kitchen cabinets and accessories suitable for various countertops, except kitchen stoves and sinks.
61 Insecticide aerosol Suitable for all types of insecticide aerosol products
62 Gravure ink and flexo ink Suitable for solvent-based gravure ink, solvent-based flexo ink, water-based gravure ink, water-based flexo ink and solvents used in gravure and flexo ink
63 Offset printing ink Suitable for offset printing inks except radiation curing ink
64 Digital multi-function copy equipment is suitable for digital copy machines, digital multi-function all-in-one machines (multi-function digital copiers, multi-function digital compound machines, Multifunctional printing and copying all-in-one machine, color copier, etc.) and other copying equipment.
65 Building decoration and renovation projects are suitable for civil building decoration and renovation projects for new construction, expansion and reconstruction. They are usually divided into unit projects and individual projects (building groups). They can be implemented in two stages: planning and design stage and acceptance stage as needed.
66 Waterproofing Membrane Suitable for modified asphalt waterproofing membranes, polymer waterproofing membranes, and bentonite waterproofing blankets. Not suitable for petroleum asphalt paper tire felt, asphalt tire flexible waterproofing membrane, polyvinyl chloride waterproofing membrane.
67 Rigid waterproofing material Suitable for inorganic leak-proofing waterproofing materials, polymer cement waterproofing mortar and cement-based penetrating crystalline waterproofing coatings.
68 Waterproof coating is suitable for volatile curing waterproof coatings (two-component polymer cement waterproof coating, one-component acrylic polymer emulsion waterproof coating) and reaction curing waterproof coatings (polyester amine waterproof coating, modified epoxy waterproof coating Coatings, polyurea waterproof coatings. Not suitable for coal tar polyurethane waterproof coatings.
69 Household Detergents Suitable for household detergents including fabric detergents and conditioners, tableware and fruit and vegetable detergents, hard surface cleaners and hand soaps.
70 Wooden Doors and Steel Doors Suitable for wooden doors, steel doors and steel-wood composite doors.
71 Digital integrated speed printing machine It is suitable for digital integrated speed printing machine. Other types of speed printing machine products can be used as a reference.
72 Heating radiators This standard is applicable to heating radiators using hot water or steam as the heating medium in industrial and civil buildings. It is not applicable to steel closed cascade radiators.
73 Leather and synthetic leather This standard applies to leather and polyurethane synthetic leather.
74 Luggage This standard applies to luggage made of textile fabrics, leather, polyurethane synthetic leather and other materials. Implemented on July 1, 2010.
75 Toner cartridges This standard applies to toner cartridges used in electronic imaging printing equipment that are newly manufactured from new parts, or new parts or reused parts. Implemented on July 1, 2010.
76 Artificial panels and their products This standard applies to artificial panels, floors, wall panels and other products. This standard replaces HBC17-2003.
77 Stationery This standard applies to stationery or similar supplies used for office, study, etc. purposes.
78 Inkjet cartridges This standard applies to inkjet cartridges using inkjet imaging technology equipment, including new inkjet cartridges and regenerated inkjet cartridges.
79 Technical requirements for preparation are applicable to the formulation and revision of national environmental protection standards.
80 Wooden toys This standard applies to wooden toys whose wood mass accounts for more than 95% of the total mass of the toy.
81 Inkjet ink This standard applies to inks for inkjet equipment and does not apply to radiation curable inkjet inks.
82 Wires and cables This standard applies to all types of wires and cables products.
83 Wallpaper This standard is applicable to all kinds of wallpapers based on paper or cloth. It is not applicable to wall felts and other similar wall hangings. This standard replaces HBC 23-2004
84 Printing Part 1: Lithographic Printing (HJ2503-2011) This standard applies to the printing process and products using lithographic printing.
85 Camera (HJ2504-2011), this standard applies to cameras. It does not include mobile phones and other devices with camera functions.
86 Mobile hard disk (HJ2505-2011), this standard applies to mobile hard disk products.
87 Color TV broadcast receivers (HJ2506-2011) This standard applies to color TV broadcast receivers with various screen sizes and display methods, including color TV broadcast receivers with cathode ray tubes, liquid crystals, plasma, etc. as display components. Television display or monitoring equipment that does not have a tuner and whose main function is television may refer to this. This standard replaces HJ/T 306-2006
88 Network Server (HJ2507-2011) This standard applies to network servers, which include desktop servers, rack servers and blade servers in terms of structure, and computing servers and storage servers in terms of function.
89 Telephone (HJ2508-2011) This standard applies to telephones, including wired telephones and mobile telephones.
90. Wires and cables (HJ 2501-2010) This standard specifies the requirements for harmful substance content, halogen-free, low smoke, toxicity, and combustion of wires and cables. This standard applies to all types of wire and cable products. This standard applies to China environmental labeling product certification.

Initial certification

1. The enterprise will submit the completed "Environmental Labeling Product Certification Application Form", environmental labeling guarantee system documents and relevant materials in the certification requirements to Central United (Beijing) Certification Center Co., Ltd. (hereinafter referred to as the certification center). After the certification center receives the certification application materials, the product department office conducts a preliminary review and signs a contract with the enterprise applying for certification. The contract clarifies the certification fees and annual supervision and inspection fees, and issues an environmental labeling product certification acceptance notice to the enterprise.

2. The Certification Center Inspection Office will review the application materials and issue document review opinions to the enterprise. The enterprise will make rectifications according to the document review opinions proposed by the Certification Center; the Certification Center Inspection Office will determine the sampling plan based on the conditions of the enterprise and products applying for certification.
3. After the certification center receives the certification fee from the enterprise, the Product Department Inspection Office issues a notice to the enterprise to form an on-site inspection team, and at the same time notifies the provincial and municipal environmental protection bureaus to send personnel to participate; and formally reports the inspection team composition and inspection plan to the enterprise one week before the on-site inspection. confirm.
4． On-site inspections are carried out in accordance with the requirements of the environmental labeling product guarantee system and the corresponding technical requirements for environmental labeling product certification. For products that need to be inspected, the inspection team is responsible for sampling and sealing the products applying for certification and sending them to the designated inspection agency for inspection.
5. The inspection team will write a comprehensive evaluation report on environmental labeling products based on the company's application materials, on-site inspections, and product environmental behavior inspection reports, and submit it to the technical committee for review.
6． After receiving the review opinions of the technical committee, the certification center will summarize the review opinions and submit them to the general manager of the certification center for approval.
7. The certification center issues environmental label certification certificates to qualified enterprises and organizes announcements and publicity.
8. If a certified enterprise needs a logo, it can order it from the certification center; if it has special printing requirements, it should apply to the certification center and file it.
9. Annual surveillance audits occur once a year.

Additional certification
1. Enterprises that require additional certification should fill out the "Application Form for Additional Certification of Environmental Labeling Products" and submit it to the certification center together with relevant materials;
2. Application for certification of a new model that is expanded (derived) from a certified product model, if its controlled key parts and materials are consistent with the original product model, and the changes are necessary to meet the technical requirements for environmental labeling products If there is no impact, you can submit an application for exemption from inspection while declaring additional items;
3. The working procedures of the certification center after receiving the certification materials are consistent with the initial certification working procedures.

Overseas enterprise certification
1. Overseas enterprises or distributors apply for environmental labeling product certification for their products produced abroad and sold domestically, fill in the "Environmental Labeling Product Certification Application Form" (overseas enterprise), provide materials according to the requirements of the overseas enterprise certification material list, and apply for certification. center;
2. After the certification center receives the certification application materials, the product department office will conduct a preliminary review, sign a contract with the enterprise applying for certification, specify the certification fees and annual supervision and inspection fees in the contract, and issue an environmental labeling product certification acceptance notice to the enterprise;
3. The certification center inspection office will review the application materials and issue document review opinions to the enterprise, and the enterprise will make rectifications according to the document review opinions proposed by the certification center;
4. After receiving the certification fee from the enterprise, the certification center will issue a notice to the enterprise to form an on-site inspection team, and formally submit the inspection team composition and inspection plan to the enterprise for confirmation one week before the on-site inspection. The certification center determines the inspection plan and sampling plan based on the situation of the enterprise and products applying for certification, and the products are sent to the designated inspection agency for inspection;
5. The inspection team writes a comprehensive evaluation report based on the company's application materials and product inspection reports, and submits it to the technical committee for review;
6. After receiving the review opinions of the technical committee, the certification center will summarize the review opinions and submit them to the general manager of the certification center for approval;
7. The certification center issues environmental label certification certificates to qualified enterprises and organizes announcements and publicity;
8. If a certified enterprise needs a logo, it can order it from the certification center; if it has special printing requirements, it should apply to the certification center and file it;
9. Annual supervision and audit are conducted once a year. The difference from the annual inspection of domestic certification companies is that a market sampling inspection is added every year during the validity period of the certificate.

Annual supervision and inspection
1. The certification center will formulate an annual inspection plan based on the company’s certificate issuance time and issue an annual inspection notice to the company in advance. The enterprise pays annual supervision and inspection fees as required by the contract, and the certification center forms an inspection team to conduct on-site inspections at the enterprise;
2. During on-site inspection, for products that need to be inspected, the inspection team will be responsible for sampling and sealing the products applying for certification, and send them to the designated inspection agency for inspection;
3. The inspection team writes a comprehensive evaluation report based on the company's materials, inspection reports, and product inspection reports, and submits it to the general manager of the certification center for approval;
4. Annual supervision and inspection are conducted once a year.

Re-evaluation certification
1. Certification enterprises that have expired in three years should refill the "Environmental Labeling Product Certification Application Form" and submit it to the certification center together with relevant materials;
2. The rest of the certification procedures are the same as the initial certification.