Active Member
|
[China]
Address: Block 5 in con-rich industrial park , Huaxing Road 69th, Longhua District,Shenzhen city,Guangdong,China
Contact name:James
ES OPTRONICS LIMITED |
|
|
G104X1-L03 Innolux 10.4" VA LCD Panel 1024×768 350nits WLED LVDS 30pins
G104X1-L03 Innolux 10.4" VA LCD Panel Features:
- Excellent brightness (350 nits)
- Ultra high contrast ratio (1200:1)
- Fast response time (Ton+Toff average 25 ms)
- High color saturation NTSC 57%
- XGA (1024 x 768 pixels) resolution
- DE (Data Enable) only mode
- LVDS (Low Voltage Differential Signaling) interface
- Ultra wide viewing angle: 176(H)/ 176(V) (CR>10) Super MVA technology
-180 degree rotation display option
- Color reproduction (Nature color)
- Wide operation and storage temperature range (-20 to 70 operation, -20 to 80 storage)
Innolux G104X1-L03 Application Details
Basic Detail : | Manufacturer: INNOLUX Model Name: G104X1-L03 Panel Type: a-Si TFT-LCD , LCM Panel Size: 10.4 inch Designed For: Industrial Application
|
|---|---|
Maximum Ratings : | OP Temperature: -20 ~ 70 °C ST Temperature: -20 ~ 70 °C RoHS Vibration Level: 1.5G (14.7 m/s²) |
Innolux G104X1-L03 Optical Details
Basic Detail : | Luminance: 350 cd/m² (Typ.) Contrast Ratio: 1000:1 (Typ.) (Transmissive) Good View at: Symmetry Response Speed: 14/11 (Typ.)(Tr/Td) ms Viewing Angle: 88/88/88/88 (Typ.)(CR≥10) Operating Mode: Super MVA, Normally Black, Transmissive
|
|---|---|
Color Performance : | Chromaticity:Wx: 0.313; Wy:0.329 Support Color: 262K/16.2M (6-bit / 6-bit + FRC) Gamut: 53% NTSC (CIE1931) White Variation: 1.40 (Max.)(5 points)
|
Innolux G104X1-L03 Mechanical Details
Pixel Features : | Number of Pixel:1024(RGB)×768, XGA Arrangement:RGB Vertical Stripe Dot Pitch(W×H):0.0685×0.2055 mm Pixel Pitch(W×H):0.2055×0.2055 mm
|
|---|---|
Physical Size : | Active Viewing:210.4(W)×157.8(H) mm Overall Dim.:238.6(W)×175.8(H) mm Bezel Opening:215.4(W)×161.8(H) mm Overall Depth:6.0/7.97 (Typ./Max.) mm
|
Outline Features : | Form Shape:Flat Rectangle Orientation:Landscape type Aspect Ratio(W:H):4:3
|
Fixation : | Face mounting holes (4-Ф2.8) on left, right bezel |
Other Detail : |
Mass:280g (Typ.) Surface:Antiglare
|
ASSEMBLY AND HANDLING PRECAUTIONS
(1) Do not apply rough force such as bending or twisting to the module during assembly.
(2) It is recommended to assemble or to install a module into the user’s system in clean working areas. The dust and oil may cause electrical short or worsen the polarizer.
(3) Do not apply pressure or impulse to the module to prevent the damage of LCD panel and Backlight.
(4) Always follow the correct power-on sequence when the LCD module is turned on. This can prevent the damage and latch-up of the CMOS LSI chips.
(5) Do not plug in or pull out the I/F connector while the module is in operation.
(6) Do not disassemble the module.
(7) Use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and easily scratched.
(8) Moisture can easily penetrate into LCD module and may cause the damage during operation.
(9) High temperature or humidity may deteriorate the performance of LCD module. Please store LCD modules in the specified storage conditions.
(10) When ambient temperature is lower than 10ºC, the display quality might be reduced. For example, the response time will become slow, and the starting voltage of CCFL will be higher than that of room temperature.
(11) Do not keep same pattern in a long period of time. It may cause image sticking on LCD.
