|
[China]
Trade Verify
Address: No.5,Fengyang Road,XiFang Industrial Zone,Beizha Community,Humen Town,Dongguan City,China
Contact name:Anna
Luo Shida Sensor (Dongguan) Co., Ltd. |
|
Verified Suppliers
|
|
|
DC 2 Wire 10-60V M30 Long Distance Inductive Proximity Sensor Switch With Cable Type
Product brief introduction :
Series : M30 DC 2-Wire Inductive Proximity Sensor
Size : M30*1.5*55mm
Housing Material : brass nickel plated
Mounting : Shielded/Non-shielded
Sensing Distance Sn(mm): 10mm/15mm/25mm
Operating Voltage : 10-60V DC
Output function : NO/NC
connection : 2M PVC cable
Specification of the sensor :
| M30 DC 2 wire inductive proximity sensor with cable | |||
| Size | M30*1.5*55mm | ||
| Mounting | ● shielded | ○ Non-shielded | |
| Sensing Distance Sn(mm) | 10mm/16mm | 15mm/25mm | |
| Housing Material | Brass nickel plated | ||
| With or Without LED | ● with LED | ||
| Operating Voltage | 10-60VDC | ||
| Ripple | <10% | ||
| No Load Current | 1KV,1ms,1kohm | ||
| Max.Load Current | 3-100mA | ||
| Leakage Current | <0.8mA | ||
| Voltage Drop | <6V | ||
| Switching Frequency | 300Hz/100Hz | 300Hz/100Hz/100Hz | |
| Response Time | 1.5ms | ||
| Switching Hysteresis | <15%(Sr) | ||
| Repeat Accuracy | <3%5%(Sr) | ||
| Protection Category | IP67 | ||
| Operating Temperature | -25°C - +70°C | ||
| Temperature Drift | <10%(Sr) | ||
| Short Circuit Protection | YES | ||
| Overload Trip Point | 120mA | ||
| EMC | RFI>3V/M / EFT>1KV / ESD>4KV(contact) | ||
| Shock/Vibration | IEC 60947-5-2,Part 7.4.1 / IEC 60947-5-2,Part 7.4.2 | ||
| Material Active Face | PBT | ||
| Connection | D5 2*0.34 2M PVC cable | ||
| DC 2 wire 10-60V CO | I1B30*CO | I2B30*CO | |
| DC 2 wire 10-60V CC | I1B30*CC | I2B30*CC | |
Friendly reminder about the sensor:
1.There are two types of proximity switches, flush and non-flush.
If the mounting bracket is made of metal, the shell of the
non-flush switch must be exposed to a certain length during
installation. For flush installation, no exposure or only a small
amount of exposure is required. If installed side by side, There
must be a certain interval between the switches. The specific
interval is subject to no interference after installation. If the
mounting bracket is non-metal, then there is no installation limit
on the distance to find the object.
2.The factory inspection standard of the inductive proximity switch
is a 1mm thick square Fe37 iron sheet. The detection distance in
actual application will vary with the material of the object to be
tested.
3.Capacitive proximity switches can detect almost all objects with
static electricity. The detection distance of the product will be
affected by the thickness, size, conductivity, and surface flatness
of the detected object. The thicker the detected object, the larger
the size. The stronger the conductivity, the smoother the surface,
the easier it is to detect, and the longer the detection distance.
Relevant information about the service :
Shipping ways :
Our normal shipping way is internation express, such as DHL,FEDEX,
TNT and so on;
When the gross weight is over 45kg, air trnasportation is also a
good way for the customers to save some cost;
Sea transportation is also can be considered, but only appointed
agent accetpable.
Payment term and delivery time :
1. Generaly speaking, 30% deposit in advance, balance paid before
the shipping;
2. Sometimes the paypal payment method is also ok if the total
amount is less than 500USD, such as sample fee;
Delivery time :
The sensors will be shipped out in 3 days when we receive the
payment if we have stocks;
If no stocks, the delivery time will be 7-10days when we received
the PO or deposit.
After-sales services :
1. The warranty period is 12 months
2. If we send the wrong parts to you, free replacement will be
available
3. As for the istallation of the parts. if you have any questions,
please do not hesitate to contact us at any time.
