Active Member
|
[China]
Address: Building 2, Gang Hua Xing Industrial Park, Chongqing Road, Fuyong Town, Shenzhen, China 518103
Contact name:
Shenzhen SMTfly Electronic Equipment Manufactory Ltd |
|
|
Reliable 20w Fiber Laser Source Pcb Marking Machine with Air
Cooling,SMTfly-DB2A:
The products are mainly for the metal laser marking, professional
design, also part of the plastic products processing can also be
applicable to the equipment, the machine uses the professional
fiber laser, domestic and imported configuration, meet the needs of
customers for a variety of materials, the device width adjustable,
let users a wider scope of application. The laser adopts integrated
whole structure, no optical pollution and power coupling loss, air
cooling, high efficiency, long life and less maintenance.
| Model | SMTfly‐DB2A |
| Power | 20w |
| Laser wave length | 1064 mm |
| Repetition frequency | 20‐500KHZ |
| Temoo gaussian beam | <2 |
| Laser output power | 10%‐100% continuous adjustable |
| Power stability(8h) | ±1%rms |
| Focus spot diameter | <0.01mm |
| Amrking machine type | Static/dynamic marking |
| Marking range | 300*300mm |
| Marking depth | ≤1.2mm |
| Marking speed | ≤800 standard characters /s |
| Min line width | 0.01mm |
| Min character | 0.15mm |
| Repeat accuracy | ±0.03 |
| Dimension | 65*80*130cm |
| Weight | 75kgs |
| Operation system | Windows 7 |
| Cooling | Build-in air cooling |
| Control interface | Standard USB |
| Beam quality | M2<1.5 |
| Operating ambient temperature | 15-35degrees Celsius |
| Power source | 110V |
Reliable 20w Fiber Laser Source Pcb Marking Machine with Air
Cooling Features:
Fiber laser marking machine beam quality than the traditional solid
laser marking machine, as the base mode (TEMOO) output, gathering
spot diameter 10um, divergence angle is the 1/4 of the
semiconductor pump laser. Particularly suitable for precision, fine
marking.
Electronic optical conversion efficiency is up to 30%, the whole
power consumption less than 500W, is the lamp pumped solid laser
marking machine 1/10, greatly saving energy consumption
expenditure.
The laser does not require any maintenance, nor does it need to
adjust or clean the lens.
Using a laser diode as the pumping source, the average working time
is 10 hours.
The processing speed is 2‐3 times of the traditional laser marking
machine.
The laser marking machine is mainly applied on metals and some non‐
metals, especially designed for the industrials have high
requirements in depth, smoothness and fineness, such as Jigs,
mould, electrical appliances, electronic communication, auto parts,
precision metal, jewelry gifts, watch glasses, instrumentation and
sanitary industry, not suitable for high reflective material.
