|
[China]
Trade Verify
Address: No.58 Dazhuang Road, TianGongYuan Street, Daxing District,Beijing, China
Contact name:Dan
Beijing Zohonice Beauty Equipment Co.,Ltd. |
|
Verified Suppliers
|
|
|
10600nm Metal Tube RF Fractional Co2 Laser Scar removal and Skin Resurfacing
Working Theory of Co2 fractional machine
Co2 fractional resurfacing is a new laser treatment modality that creates numerous microscopic
thermalinjury zones of controlled width, depth, and density that are surrounded by a reservoir of
spared epidermal and dermal tissue, allowing for rapid repair of laser induced thermal injury.
This unique modality, if implemented with proper laser-delivery systems, enables
high-energy treatments while minimizing risks.
Advantage of Co2 fractional machine
1 RF Laser Tube is more stable than traditional Glass tube, the machine is non serviceable.
2 RF Laser Tube makes the scanning dot much thinner and less harm.
3 The Laser Tube frequency can reach more than 5000HZ, high scanner can get better treatment effect.
4 Four working modes ,Fractional, CW, Pulse, Pulse ,one machine can been used in widely
in different surgery.
5 Special designed energy self-inspected and energy-replenishment system ,improving the stability and effect.
6 Multi safety protection, water, electric ,remote interlock warning alarm.
7 Laser anti-leak designing, confirm the operator and client safety.
8 Whole low voltage system, no electric danger and no electric radiation
Features of Mecial CE 10600nm medical fractional co2 laser beauty equipment
1. Particular designed intelligent laser control system ensures a precise treatment
2. Laser energy shooting is an even steady and safe treatment process.
3. Wide range application, effective treatment
4. Easy and fast treatment, no down time
Technical specification
Glass tube CO2 fractional laser | RF CO2 Fractional laser | |
Laser type | 10600nm CO2 Laser | 10600nm RF CO2 laser |
Optical maser | Special amorphous laser | RF laser |
Operating system | Korean manual drive intelligent controller system | Korean auto intelligent controller system |
Output pattern | Circle,square,ellipse,sexangle,rectangle, beeline,etc.for your option | Circle, square, etc. 8shapes for your option |
Spot diameter | 0.12-1.25 mm | 0.1-1.0 mm |
Laser power | 30W | 10W/30W/60W |
Display screen | 8.4 inch colorful touch screen | 8.4 inch colorful touch screen |
Light transfer system | 7 Joint hinged arm | 7 Joint hinged arm |
Guide light source | Semiconductor red light | |
Dot interval | 0.5- 1.0 mm | 0.1-2.0 mm |
Treatment depth | 0.1-2.0 mm | 0.1-2.0 mm |
Working volt | 220V 50HZ / 110V 60HZ | 220V 50HZ/ 110V 60HZ |
Dimension | 53*38*139cm | 53*38*139cm |
Theory of operating
pulse treatment is a fractional treatment that produces thousands of deep, tiny columns in your skin, called micro treatment zones. pulse is fractional in that it intensively treats old epidermal pigment cells without effecting any of the surrounding tissue, which reduces healing time (about 24 hours) and promotes the skin’s natural process for creating newer and healthier tissue to replace the damaged tissue. pulse treatment is a safe, non-invasive procedure that allows you to rediscover the fresh, healthy skin for your beauty.
Warranty
1) Within 1year, if there is some accessory going wrong, we will send you the accessory at once,
free of charge.
2) Within 1month, if the machine is of any big fails, we will send you a new machine.
3) Within 1year, if you send back the equipment for repair, we will be responsible for the repair,
including the changes of the accessories, both of them are free of charge.
4) After 1year, we offer to repair the machine, but we require for the cost of the changed parts,
not for manual cost.
5) No responsibility for man-made destroy.
6) If the buyer has any questions from our technical department, we can supply on-line service
Similar product
Other product
Keywords"10600nm Metal Tube RF Fractional Laser Cutter Machine Skin Resurfacing"
