The photothermal effect is the main mode of action of current
clinical laser applications. When heat energy acts on the surface
of a tissue, it will directly heat the tissue within an absorption
length. The heat is also conducted to the surrounding tissue
through thermal relaxation and is not conducted to adjacent
tissues. The heat vaporizes or removes tissue near the surface. The
rate of tissue removal depends on the concentration of laser energy
in the tissue. The higher the laser power, the faster the water
vaporizes and the tissue is removed, and the minimal heat damage
removes the tissue faster than the surrounding tissue underneath
the heat conduction, which ensures that the coagulation effect is
limited to the absorption length of the laser.
Generally speaking, after the first laser irradiation, the skin
surface will appear white bubbles. This change indicates that the
water in the cells has vaporized, leaving dry protein debris. When
these debris are washed away with salt water, obvious skin
shrinkage will occur. The skin has a yellowish appearance, and
these features are more obvious in thicker skin such as around the
mouth. There is significant shrinkage in thinner skin areas such as
the upper eyelids without obvious yellowing of the tissue. After
three or more irradiations, some yellow-brown dehydrated protein
denatured substances can be seen. These substances represent the
denatured collagen of the dermal reticular layer, and will appear
further thereafter. Carbonization and heat dispersion lead to
tissue necrosis.
Features:
Treatment principle and scope 1) Treatment principle: The thermal relaxation time of human skin
tissue is about 1-2 milliseconds. In order to effectively reduce
the scope and degree of thermal damage to surrounding tissue, the
laser pulse width must be compressed to less than 2 milliseconds,
and the pulse gap should be large. Greater than 2 milliseconds, it
is hoped that the surrounding tissue will be cooled during the gap
time after the pulse. The carbon dioxide laser therapy device is
developed according to such requirements. Because the pulse width
of less than 2 milliseconds is ultra-short compared to the pulse
width of several tens of milliseconds of ordinary therapeutic
devices, this pulsed carbon dioxide laser therapy machine that can
output ultra-short pulse width is referred to as a carbon dioxide
laser therapy device. The CO2 laser output beam is output through a focusing mirror. The
high temperature generated by the focusing point is absorbed by the
water in the cells and vaporizes the target tissue, thereby
achieving the purpose of treatment.
2) Treatment scope: Plastic surgery: laser skin resurfacing (rough skin, enlarged
pores, dull complexion, photodamage, etc.); laser wrinkle removal
(crow's feet, forehead wrinkles, Sichuan folds, nasolabial folds);
pigmented nevus, epidermal pigment spots (freckles, etc.), Cutting
of epidermal tags (all kinds of warts); scar repair (acne scars,
hypertrophic scars, linear scars, stretch marks, burn scars,
depressed scars, etc.); other applications (xanthoma, syringoma,
seborrheic Keratinization, etc.) Dermatology: removal of excess material and treatment of moles and
body odor Gynecology: cervical erosion Otology: Removal of nasal polyps Urology: circumcision, genital warts Anorectal: Hemorrhoidectomy Physiotherapy Department: Skin numbness, periarthritis of the neck,
periarthritis of the shoulder, arthritis, using beam expander
Continuous pulse mode: Cutting function Various pigment spots, warts, corns, hemorrhoids and other skin
tumors, etc.
Super pulse mode: Shaping function Various precision plastic surgery, eye bag removal, brow lift,
double eyelid surgery, circumcision, age spots and other pigmented
diseases, skin laxity, scars, wrinkle removal
Dot matrix mode: Wrinkle removal and skin rejuvenation function Various wrinkles, forehead lines, glabellar lines, perioral lines,
perioral lines, stretch marks, neck lines, skin, private sagging,
various scars, pigmented lesions, and vascular lesions
CO2 laser can solve a variety of skin problems in medical beauty
and skin treatment, mainly including the following aspects:
1. **Wrinkles and Skin Sagging**: CO2 laser can stimulate the
regeneration of collagen, making the skin tighter and more elastic,
thereby reducing wrinkles and improving skin sagging.
2. **Acne and Acne Scars**: CO2 laser can be used to treat acne and
its scars, promote the healing of acne scars and reduce acne
inflammation.
3. **Pigmentation**: CO2 laser can remove pigmentation on the skin,
such as freckles, sun spots, age spots, etc.
4. **Skin lesions**: CO2 laser can be used to treat some benign
skin lesions, such as warts, rashes, moles, etc.
5. **Skin plastic surgery**: CO2 laser is widely used in skin
plastic surgery, such as removing skin lesions and removing skin
tumors.
6. **Skin reconstruction and repair**: For some skin defects or
scars, CO2 laser can help with skin reconstruction and repair,
improving the appearance of the skin.
CO2 laser offers several advantages in vaginal tightening
treatment:
1. **Non-invasive**: CO2 laser treatment is a non-invasive
treatment method that does not require incision of skin or tissue,
reducing surgical risks and recovery time.
2. **Safety**: CO2 laser treatment is a clinically proven safe
treatment method that can accurately control the output of laser
energy and reduce the occurrence of adverse reactions and
complications during the treatment process.
3. **Effectiveness**: CO2 laser can stimulate the regeneration of
collagen in the vaginal wall tissue, increase the thickness and
elasticity of the vaginal wall, thereby improving problems such as
vaginal relaxation and incontinence, and achieving vaginal
tightening.
4. **Quick and Convenient**: CO2 laser treatment is usually
completed within several short sessions. Each treatment lasts for a
short time and patients can return to normal activities quickly.
5. **Improve the quality of life**: Vaginal tightening treatment
can improve problems such as vaginal laxity and incontinence,
improve the quality of life, and enhance satisfaction.
Packing and Shipping:
FAQ:
Q: What is the brand name of this product? A: The brand name of this product is GOMECY.
Q: What is the model number of this product? A: The model number of this product is GMS C5 Verticle CO2 Machine.
Q: Where is this product made? A: This product is made in BEIJING.
Q: Is this product certified? A: Yes, this product is certified with CE and ISO.
Q: What is the minimum order quantity for this product? A: The minimum order quantity for this product is 1.
Q: What is the price range for this product? A: The price range for this product is US $5200.00 - 5900.00 per
set.
Q: How is this product packaged? A: This product is packaged in an aluminum case.
Q: How long is the delivery time for this product? A: The delivery time for this product is 5 days.
Q: What are the accepted payment terms for this product? A: The accepted payment terms for this product are T/T and Western
Union.
Q: How many units of this product can be supplied per month? A: The supply ability for this product is 30 units per month.