Active Member
|
[China]
Address: 1911 OF SHUIXIU ROAD,KUNSHAN,SUZHOU,JIANGSU,CHINA
Contact name:Lucky Xu
SUZHOU HYUNVAN CNC MACHINERY CO.,LTD. |
|
|
High Grade CO2 Industrial Laser Marking Machine For Plastic Wood Leather
Product Description:
CO2 laser marking machine adopts infrared gas laser,10.64μm,CO2 gas filled with high pressure glow discharge is generated in a discharge tube,the gas molecules released from the laser,the laser energy amplification after the formation of laser material processing,laser beam to be gasified surface processing reach the purpose of carving.
Specifications:
* Laser school system is closed,light stability,without debugging.
* Low power consumption,long laser life,after power reduction inflatable continue to use.
* The software adjusts the power,support PLT,DXF,BMP and other file formats
* Support automatic coding,jump numbers,bar codes and two-dimensional code marking.
Technical Parameters
(Low power)
| Model number | Plastic,Wood,Paper,Acrylic,Crystal,Leather Marking,CO2 Laser Marking Machine |
| Laser power | 10w/30w/60w |
| Maximum speed | 7000mm/s |
| Graphics formats | PLT,BMP,JPG,PNG,TIP,PCX,TGA,ICO.DXF |
| Marking Scope | 100*100mm |
| Power stability | (8h)<+-1% rms |
| Pulse repetition frequency | <20KHZ |
| Power | 600W/800W/1000W |
| Engraving Depth | <=3mm |
| Minimum character | 0.2mm/0.4mm/0.4mm |
| Laser wavelength | 10.6um/10.2um |
| Marking size | 100x100,140*140,200*200mm |
| Cooling method | Air cooling |
| Working voltage | 110/220v+-10%,50/60HZ |
(Higher power)
| Model number | Plastic,Wood,Paper,Acrylic,Crystal,Leather Marking,CO2 Laser Marking Machine |
| Laser power | 100w/150w/275w |
| Maximum speed | 7000mm/s |
| Graphics formats | PLT,BMP,JPG,PNG,TIP,PCX,TGA,ICO.DXF |
| Marking scope | 300*300mm-1300*1300mm |
| Power stability | (8h)<+-1% rms |
| Pulse repetition frequency | 0-0KHZ |
| Power | 600W/800W/1000W |
| Engraving Depth | <=3mm |
| Minimum character | 0.2mm/0.4mm/0.4mm |
| Laser wavelength | 10.6um |
| Marking size | 300*300mm-1300*1300mm |
| Cooling method | Air cooling |
| Working voltage | 110/220v+-10%,50/60HZ |
Installation environment requirements
1. Prevent vibration: The optical path of the laser marking machine
is very precise, so the working environment must be stable. If the
working environment is vibrating, the optical path of the laser
marking machine will change, and the effect of the laser will be
directly affected!
2. Reduce dust: Because there are many optical components and precise electronic components inside the laser equipment, it is necessary to prevent dust from being adsorbed on the laser and those optical lenses, which has an impact on the quality of the light.
3. Voltage standard: The voltage of the laser welding machine must be in strict accordance with national standards, and the voltage should not have large fluctuations. If voltage fluctuations are recommended to install a voltage regulator, the working environment is recommended to stay away from high-powered equipment.
4. Good grounding: Only correct and good grounding can make it work properly. The laser power supply and welding control system are all digitally controlled by industrial microprocessors. Only good grounding can ensure their normal and stable operation.
