Home Companies JINAN QUALITY CNC MACHINERY & EQUIPMENT CO.,LTD

Gantry Heavy Cnc Plasma Steel Cutting Machine , Cnc Plasma Cutting Table

Active Member

Contact Us

[China]

Address: 470, Building 3 , Zhongrun Century Center, NO 12111 Jingshi Road , LiXia District, Ji'nan, Shandong, China (Mainland)

Contact name:Carol Zhu

JINAN QUALITY CNC MACHINERY & EQUIPMENT CO.,LTD

Gantry Heavy Cnc Plasma Steel Cutting Machine , Cnc Plasma Cutting Table

Country/Region	china
City & Province	shandong
Categories	Plasma Welders

Product Details

Gantry Heavy Cnc Plasma Cutting Machine For Metal Plate Plasma Cutting

Descriptions of Gantry Heavy Cnc Plasma Cutting Machine For Metal Plate Plasma Cutting

QCP CNC Plasma cutting and flame cutting machine is a new type of thermal cutting equipment. It works by using a plasma arc (with compressed air) or a high-temperature high-speed flame (with oxygen + acetylene or propane) as a heat source to partially melt and cut metal simultaneously, then blow away the molten metal with a high-speed air stream so as to form a narrow slit. The machines not only have high cutting speed, narrow slit, flat cut, small heat affected zone, low deformation of the processing metal, simple operation, but also with remarkable energy saving and material saving effect.

1. QCP plasma cutting machines adopt high-quality cast steel to build gantry to make sure of rigidity and light weight structure,so the machines can move more stable ,more smoothly and more precisely with less movement inertia, also prolong the lifespan of the motors greatly.

2. X and Y axis adopt Taiwan-imported Hiwin linear square rail and siding blocks,and Y axis is driven by dual-big-torque 86 stepper motors , which make the machines moving more smoothly and precisely.

3. Professional START MICROSTEP CC-M4 ,special design for gantry plasma cutting machines :

1). START MICROSTEP CC-M4 is designed to cut metals with plasma and torch 2 kinds of cutting-mode;

2). High reliability as well as good resistance to plasma disturbance, lightning and surge;

3). Applied torch/plasma cutting technology, able to perform corner speed control and height control automatically;

4). Kerf compensation, reasonability check and simulating operating;

5). Breakpoint restoration, automatic power-back recovery and automatic breakpoint memory if electrical powering break;

6). Random section and piercing point selection;

7). Extended piercing for thick plate and bridging feature for thin plate;

8). Optional piercing position feature in mode of RETURN, SECTION(return,section) and RESBREK(breakpoint restoration), very convenient for user control;

9). Ready for transitional cutting operation at any moment;

10). Special short line machining feature based on smooth travel, extensively applicable to metal blanking as well as advertisement and ironwork fabrication, etc;

11). 24-type-part patterns in LIBRARY including the common machining parts , extensible and customizable and with auto-nesting function;

12). Compatible with many professional nesting softwares such as IBE(Germany), FASTCAM, etc;

13). Interface language can support English,Russian,Spanish,French,Czech,Japanese and Slovankian,also it can be customized to other language;

14). 10.4" colour-screen with dynamic graphic display, 8-times zoom, free point automatic tracking;

15). Using U disk read,edit ,operate the file and upgrading the controlling-software easily.

16). With 4G sysetm storage memary, which can support to operate super-big cutting file.

4. Professional THC LEADER FLSK F1620E can adjust plasma-cutting torch up and down automatically to keep fixed distance with the metal plate ,so the plasma torch can cut unflat metal plate safely and quickly.The working way of THC is based on the characteristics of constant current of plasma power generator and checking the arc voltage of plasma power generator to control the torch height momentarily.

5. Plasma torch can cut the 0.1-30mm metal sheet with plasma power generator. (The exact cutting thickness depends on plasma power generator, please see the Cutting Thickness in the following.)

Flame torch can cut the 5-200mm metal sheet ( cutting speed 0--1000mm/min ) with oxygen + Propane or acetylene. (There is no plasma power generator for flame cutting.) Flame cutting torch is for optiaonal.

Applications of Gantry Heavy Cnc Plasma Cutting Machine For Metal Plate Plasma Cutting

QCP plasma cutting machines are widely used to cut iron sheet,aluminium / brass / copper / titanium / nickel sheet,galvanized sheet,stainless steel plates,carben steel plates,wild steel, alloy steel and almost all metal plate and pipes (needs rotary device for pipes-cutting ) with fast working speed, high precision and low cost.

Machine technical parameters of Gantry Heavy Cnc Plasma Cutting Machine For Metal Plate Plasma Cutting

I. Basic Configuration Technical Parameters
Machine package dimension & weight		2280mm×3500mm×1700mm 2700KG
Effective cutting size		2200mm×6000mm (y axis can be added as per your needs)
Cutting torch		1. plasma cutting torch 2. flame torch as optional
Plasma cutting thickness		plasma: according to plasma generator
The cutting torch height		≤170mm
Plasma Cutting speed		plasma:0-8000mm/min (depends on metal thickness,arc set on THC, current set on plasma generator)
Travelling speed		0-10000mm/min
II. Critical Parts List
Name		brand & specifications			set
Plasma machine frame		heavy duty frame			1
Controlling system		START MICROSTEP CC-M4 (10.4 inch diplay screen)			1
Arc Voltage Plasma Torch Height Controller		LEADER FLSK F1620E			1
Motor & driver		Japanese Panasonic servo 750W			3
Rail		Taiwan Hiwin NO 20 square linear rails			4
Rack		Longitudinal 7 precision rack
Switches & contactors		Schneider
High strength bearing		Japanese NSK
Anti-collision device		JINAN QUALITY CNC			1
Independent control cabinet		JINAN QUALITY CNC			1
Automatic programming and nesting software		Australian FastCAM software			1
Warranty time		3 years (replace parts during warranty for no human reasons)
III. Machine Frame
1.The gantry adopts the German messel technology and the machine frame with eliminating structure of torsional moment. The gangtry is a cast-steel structure, so that it will not be deformed in long-term use.
2.The mechanical transmission system all USES the precision rolling bearing and the processing precision is the national standard 7 class precision gear and the rack meshing.
3.The automatic compensation gap device is added in the transverse and longitudinal gear transmission structure, so that the transmission structure can accurately execute the instructions from the numerical control system.
4.Active end beam: longitudinal track adopts linear slide rail to make it run smoothly in two tracks.
5.All parts and components of the machines are treated with blackening, electroplating and other surface treatments.
6.The whole machine is sprayed primer after sandblasting, surface paint using orange paint, the color of red and black.
IV. Mechanical Accuracy
Linear positioning accuracy	±0.1mm/10m		Linear repetition accuracy	±0.4mm/10m
Cutting torch stroke accuracy	≤100mm		Cutting speed accuracy	±5% speed set
Cutting torch automatic lifting precision			±0.5mm
Side length error (four sides)	0.5mm		Diagonal deviation	0.5mm
Return to origin deviation	0.3mm		Intersection point deviation	0.5mm
Diagonal straightness	0.5mm		2-direction Line deviation	0.2mm
Positioning accuracy of the whole machine			0.1mm
V. Work Environment
Input voltage	Plasma generator: 380V±10%; control cabinet: 220V±10%
Input power	5000W
Ambient temperature	0 to 40 ℃		Relative humidity	95% (non-condensation)

Machine Parts of Gantry Heavy Cnc Plasma Cutting Machine For Metal Plate Plasma Cutting

Cutting thickness of Gantry Heavy Cnc Plasma Cutting Machine For Metal Plate Plasma Cutting

Chinese HuaYuan Brand
Hua Yuan 63A	< 5mm
Hua Yuan 100A	<carben steel 12mm,stainless steel 6mm
Hua Yuan 120A	<carben steel 18mm,stainless steel 10mm
Hua Yuan 160A	<carben steel 25mm,stainless steel 15mm
Hua Yuan 200A	<carben steel / aluminium 30mm,stainless steel 20mm
USA Hypertherm Brand
Hypertherm 45A	<carben steel 8 mm,stainless steel 5mm
Hypertherm 65A	<carben steel 12mm,stainless steel 8mm
Hypertherm 85A	<carben steel 16mm,stainless steel 12mm
Hypertherm 105A	<carben steel 20mm,stainless steel 14mm
Hypertherm 125A	<carben steel 25mm,stainless steel 16mm
Hypertherm 200A	<carben steel 32mm,stainless steel 22mm

Our service of Gantry Heavy Cnc Plasma Cutting Machine For Metal Plate Plasma Cutting

1. The company who initially provide 3 years warranty in the world;

2. 24-hour full after sales service;

3. All finished machines we delivered are 100% strictly tested by our QC department and engineering department and sending working zamples together with machines;

4. OEM Service Customized and OEM orders are welcome due to our abundant experiences. All the OEM services are free.

5. Standard Package List as below:

QCP3080-G plasma cutting machine					1 SET
Plasma generator according to your need					1 SET
Nozzles and electrodes					Hypertherm: 2 sets (HuaYuan :10 sets)
Smoke-ventilator					1 SET
Y axis length					8M-Rail as standard
Australian FastCAM software with dongle					1 SET
Proximity limit (as spare part)					1 PIC
Allen wrenches					1 SET
U DISK (operating manual and videos)					1 PIC
Cutting zample					1 PIC (as your requirements)

About us

Q1: How about warranty?

A1: 36-months quality guaranty, the machine with main parts(excluding the consumables) shall be changed free of charge when if any problem during the warranty period.After 36-months warranty, we ll offer all the parts with the agent price.

We offer lifetime technical supports, afterservice person in charge :Skype / whatsapp/ Wechat/ Tel: +8613176441785 Carol zhu.

Q2: What's the delivery time?

A2: 10-15 working days to delivery port.

Q3: What's the usually delivery terms?

A3: FOB, CIF, DDP, Exworks will be OK.

Q4: What's the MOQ?

A4: 1 set.

Q5: What's the delivery port?

A5: Usually Qingdao port, also we can deliver machines to Shanghai port and Guangzhou.

Q6: What's the packing?

A6: Iron Pallet and export- standard Plywood cases .

Q7: Can I change the motor to my local voltage and frequency, Is there any extra charge?

A7: Yes, we can supply motor ,all parts and components with your local frequency and voltage, such as 220V/380V/410V/415V/440V, and 50HZ/60HZ with no-profit charge.

Q8: Can you place OEM orders?

A8: Yes,OEM orders are acceptable. We can manufacture machines according to your requirement with your design,logo,color,materials or brand information.

Q9:Where is your factory located? How can I visit there?

A9:Our factory is located in JiNan City, Shandong Province, China, about 2 hours from Beijing, 3.5 hours from Shanghai and 10 hours from Guangzhou by high-speed train.