Low Pressure Industrial Centrifugal Fans Belt Drive Large Flow Low Speed

Low Pressure Industrial Centrifugal Fans Belt Drive Large Flow Low Speed

This series of centrifugal fan has large flow, low pressure, high efficiency, low noise and stable performance curve. Usually used for supporting drying equipment. The drying temperature must not exceed 80 ° C. Can be used to dry grain and tea. It can also be used as industrial drying clinker.

1. Impeller:
Consists of tilting circular arc thin plate blade, curve front plate and flat plate rear disc, all made of steel plate and corrected by static and dynamic balance, air performance is good, efficiency is high, noise is low, operation is stable. 3. 5 is composed of 12 leaves, 4. 5 is composed of 14 leaves, and more than 5 is composed of 16 pieces.
2. Housing:
Made into two different types, the 3-12 housing is integrated and can not be disassembled; the 14-20 housing is made into two open types, divided in two halves along the middle horizontal plane and connected by bolts.
3.Inlet:
Made into a whole, installed on one side of the fan, parallel to the axial section of the curve shape, can make the gas enter the impeller smoothly, and the loss is relatively small.
4.Transmission:
Consists of spindle, bearing box, rolling bearing and belt wheel.

Fan Type
The fan shall be of the single-inlet centrifugal type with the backward curved steel wheel. The drive types shall be direct, coupling or belt.
Standards and Codes
The design and manufacturing of the fan shall comply with JB/T 10563-2006 Technical Specification for General Purposes Centrifugal Fans; The wheel dynamic balancing test shall comply with JB/T 9101-1999 Fan Rotor Balance; The wheel overspeed test shall comply with JB/T 6445-2005 Overspeed Test for Industrial Fan Impeller; The air performance test shall comply with JB/T AMCA 210-99 Laboratory Methods of Testing Fans for Aerodynamic Performance Rating. The welding technique shall comply with JB/T 10213-2000 Technical Specification for Fan Welding Inspection; The fan safety shall comply with GB/T 19074-2003 Industrial fans--Mechanical safety of fans--Guarding.

Centrifugal fan production process:

Case Show: