|
[China]
Trade Verify
Address: Room 105, Building F4, District F, Tianan Digital City, Nancheng District, Dongguan City, Guangdong Province,China
Contact name:Lisa
Hai Da Labtester |
|
Verified Suppliers
|
|
|
Air Ventilation Chambers ISO9001 Overheating circuitbreake Accelerated Aging Chamber
Air Ventilation Chambers ISO9001 Overheating circuitbreake Accelerated Aging Chamber is applicable to aging resistance test for electrical insulating materials and ventilation aging test for electronic parts, plastic products. Ventilation type aging chamber is suitable for the sample aging in the simulated high temperature and atmospheric pressure air to measure its performance. The max temperature is up to 300 ℃. The air change rate can be customized.
Standards met: JB/T7444-94 Air heat aging test,GB/T3512-01 Plastic hot air exposure test and so on.
Control system
Technical Parameters
| Test zone size W*H*D(mm) | 450*500*450 | 600*600*600 | |||||||||
| Exterior chamber size W*H*D(mm) | 1180*1300*750 | 1330*1400*900 | |||||||||
| Temperature range | Room temperature+10℃ to 200℃(300℃) | ||||||||||
| Performance | Tempretaure fluctuation | ±0.5℃ | |||||||||
| Temperature uniformity | ±2℃ to± 3℃ | ||||||||||
| Temperature resolutin | 0.1℃ | ||||||||||
| Heat uu time(minutes) | 30 | 40 | |||||||||
| Material | Exterior chamber material | Stainless steel plate+ Power Coated | |||||||||
| Inner chamber material | SUS#304 stainless steel plate | ||||||||||
| Insulation | PU& Fiberglass wool | ||||||||||
| System | Wind Circulation | Sirocco fan | |||||||||
| Heating system | SUS#304 stainless steel high-speed heater | ||||||||||
| Cooling | Imported compressor, finned type evaporator, air-cooling condenser | ||||||||||
| Controller | LCD touch panel controller | ||||||||||
| Air change rate | 5 to 200(3to250) times/ hour | ||||||||||
| Other Components | Vaccum glass inspection window, cable port(50mm), control status indicator lights, chamber lamp, loading shelves(2pcs for free) | ||||||||||
| Safty Devices | Overheating circuitbreaker,compressor overload protection,control system overload protection, humidifying system overheating protection, beakdown i ndicator light | ||||||||||
| Power Supply | AC3φ380V 60/50Hz | ||||||||||
| Customization | Customization of inner chamber size, tempreture&humidity range,ect. | ||||||||||
Safety protection device
1. Test space temperature fuse
2. The fan motor overheating
3. overtemperature
4. The overall equipment due to phase / reverse phase
5. Overall Equipment Timing
6. Leakage Protection
7. Open the power distribution control cabinet power protection
8. The automatic shutdown after a fault alarm
Heating system
1, the use of far-infrared heating nickel alloy heating wire speed
2, high temperature, ventilation system completely independent
3, the temperature control output by the microcomputer calculus, to
achieve high accuracy and high efficiency power efficiency
Security System
1, the overall equipment overtemperature
2, the overall equipment regularly
3, overload protection
4, fan overheating protection
Case structure
1. ventilation aging chamber has a large observation window with
bright lights to keep the box and the use of tempered glass, clear
observation box condition at any time.
2. The aging tank unit is equipped with low-speed dial.
3. The cabinet insulation using ultra-fine glass fiber insulation
cotton can avoid unnecessary energy loss. The left side of the box
with test holes have 50mm, and for external test power line or
signal line. Ventilation time and frequency can be set
Image:
