Home Companies SKYLINE INSTRUMENTS CO.,LTD

Shoe Lace To Eyelet Abrasion Test Machine With Touch Screen

SKYLINE INSTRUMENTS CO.,LTD

Contact Us

[China] country

Trade Verify

Address: No.1802 Room 6# Building Universal Commerce Center Nancheng District Dongguan Guangdong China

Contact name:Ivy Xie

Inquir Now

SKYLINE INSTRUMENTS CO.,LTD

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Shoe Lace To Eyelet Abrasion Test Machine With Touch Screen

Country/Region china
City & Province dongguan guangdong
InquireNow

Product Details

Usage

 

Shoelace Rubbing Resistant Tester is suitable for all shoelaces wear resistance tests. Through the reciprocating motion of the movable gripper, the two shoelaces that cross each other horizontally are rubbed against each other to check the wear resistance. Four groups of samples can be tested at the same time without interfering with each other.

 

 

Standard

 

GB3903.36, ISO 22774:2004

method 1: lace to lace abrasion;

method 2: lace to standard eyelet abrasion;

method 3: lace to eyelet (from footwear) abrasion.

 

Test Method: SATRA TM154

Shoe lace to shoe lace and shoe lace to lace carrier abrasion

 

 

Technical parameters

ItemSpecification
Activity gripper and fixed gripper’s mini space280 ±50 mm
Reciprocating stroke of activity gripper35 ± 5 mm
Test Speed60 ± 6 cycles/min
Gripper4 Sets
TemplateAngle 52.5°, Length 190 mm
Metal stripW 25mm, L 60mm stainless steel
Weight250 ± 3g, 4 pics
CounterTouch screen 0~999,999
Dimension55 cm × 47 cm × 34 cm
Weight43 kg
Power1Phase 220V50HZ

 

 

Application

 

The shoelace installation method is as follows: take two shoelaces, hook the middle section to form the right one and the left one, and use the machine's right clamp (moving clamp) to clamp the two ends of the right belt naturally. The distance is 25MM, with the help of the sample gauge, make the right belt hook the left belt at 52.2°, the hook point is 120MM away from the coming point, and then clamp one end of the left belt with the left clamp (fixed clamp), and put the other end in the groove of the pulley , and suspend the weight below, the natural distance between the pinch point and the wheel groove is 35±5MM. During the test, the movable clamp reciprocates in a straight line from left to right at a constant speed, so that the middle sections of the two shoelaces rub against each other.

 

 

Hot Products

ISO 340 Conveyor Belt Vertical Burning Test Chamber 1. Scope: This tester is suitable for conveyor ...
Intelligent Automatic Touch-Screen Control Oxygen Index Tester I. Intelligent Full-automatic Touch ...
Building Material Flammability Test Furnace with Touch Screen Control Description The building ...
Building Material Flammability Test Furnace with Touch Screen Control Description The building ...
ISO5660 Cone Calorimeter Analysis Instrument For Heat Release Product introduction Cone Calorimeter ...
ISO5660 Cone Calorimeter Analysis Instrument For Heat Release Product introduction Cone Calorimeter ...