|
[China]
Trade Verify
Address: No.1802 Room 6# Building Universal Commerce Center Nancheng District Dongguan Guangdong China
Contact name:Ivy Xie
SKYLINE INSTRUMENTS CO.,LTD |
|
Verified Suppliers
|
|
|
Programmable Constant Temperature and Humidity Test Chamber
Use
The constant temperature and humidity test chamber, also known as
the high and low temperature alternating heat and humidity test
machine, is an indispensable test equipment for electrician,
aviation, automobile, home appliance, paint, scientific research,
etc., used to test and determine electrical, electronic and other
products and materials. Dry, drought-tolerant, cold-resistant,
moisture-resistant parameters and performance after test
temperature changes.
Features
Imported high-precision microcomputer color touch screen
temperature and humidity controller, switch between Chinese and
English,
◆Test hole (left side of the machine) 50mm, can be used for
external test power cable or signal cable
◆ Original European and American imported fully enclosed low noise
high and low temperature compressor
◆ Double-layer high temperature resistant high-strength sealing
strip is used between the door and the box to ensure sealing
◆The inner and outer boxes are made of imported (SUS#304) stainless
steel.
◆The observation window adopts multi-layer hollow tempered glass
and inner glued sheet type conductive film (the test process can be
clearly observed)
◆Safety protection device, when any failure occurs, the fault
status is immediately displayed on the screen and the power is cut
off to ensure the safety of the machine, the tested product and the
use.
Main technical indicators
| Studio size | 400 × 400 × 500mm(D×W×H) |
| Dimensions | 1000×870×1700mm (D×W×H) |
| Temperature Range | -20 - 150(°C) |
| Temperature fluctuation | ≤ ± 1 ° C |
| Temperature uniformity | ≤ ± 2 ° C |
| Temperature deviation | ≤ ± 1 ° C; |
| Lifting temperature rate | Cooling speed RT ~ -40 ° C, average 2 ° C / min nonlinear Heating rate -40 ~ +130 ° C, average 3 ° C / min nonlinear |
| Wind speed | 1.7 ~ 2.5m / s |
| Power | about 6.5Kw |
| Power supply | 380V ± 10% V; 50Hz |
The above indicators are measured at ambient temperature ≤ 25 ° C, under normal pressure, no load, no load conditions, within 1/6 of the inner wall of the tank;
Meet relevant standards and test methods
GB/T2423.22-87Nb GJB1032-90 MIL-STD-2164/(E/C)
GB/T2423.4-93 GB/T2423.34-86 GJB150.9-86
