|
[China]
Trade Verify
Address: No.1802 Room 6# Building Universal Commerce Center Nancheng District Dongguan Guangdong China
Contact name:Ivy Xie
SKYLINE INSTRUMENTS CO.,LTD |
|
Verified Suppliers
|
|
|
IS5967 Furniture Testing Equipment Strength and Stability Testing Machine for Tables and Trollys
Features
1 It equips 5 group pneumatic cylinder which is 1 set vertical
device and 4 set calibrate velocity & thrust separately. Stroke
is 500mm
2 Quadruplet brake of vertical device can be adjustment front and
back & up and down (100mm~900mm)
3 Quadruplet brake of horizontal device can be adjustment up and
down & left and right, it can cooperate with different test
position.
4 it has several rows screws hole in the bottom panel of
tester which is convenient to install different accessory or fixed
test condition
5 it equipped the quick coupling location in front of
pneumatic brake for each group which is convenient to change
different load or grip.
6 color touch screen & PLC controller, easy operate
interface, display imaging and more inconvenient for operator.
This test machine is used for testing the strength and stability of
tables and trollys.Can do following testing
Strength testing
1. Vertical static load test
2. Sustained load test
3. Horizontal static load test
4. Vertical impact test
Stability Testing:
1. Vertical stability test
2. Horizontal impact test.
Technical parameter
a.Frame(Alluminium)
-6 vertical post - 4 fixed. 2 adjustable position along the frame length (3m) to hold horizontal cylinder
-5 horizontal cross bar -4 fixed . 1 adjustable position along the frame length(3m) and height (2m) to hold vertical cylinder,adjustable position & height
b.Size: 2m×3m×2m(H)
c.Loading pad (BS BN requirement)& bag weight 91kg(BIFMA requirement)
d.Type of cylinder:Double-acting cylinder
e.Maximum force:2000 Newton
f.1 unit horizontal cylinder
-To apply a horizontal force for tilting and legs/glide tests.
-Attached to the pulley system(adjustable & removable
-Adjustable height (500-1800mm) & horizontal position (along the frame length,3m)
-Stroke length:500mm
g.1 unit vertical cylinder
-To apply a vertical force for back rest, tablet and arm rest tests
-Adjustable position along the cross bar(2m)
-Stroke length:500mm
h.High and position adjustment,powered
i.Voltage:single phase AC 220V 50/60HZ
j.Compress air:6kg/cm²
k.Control button
-ON/OFF button
-Load display
-Cycle display - 6 - digit
-Force holding time:1 minute(strength test)
l.Stopper - to restrain the furniture base from sliding 12mm thickness.
Specification
| Basic Test Frame | 2.5x2.5x2m,be made of 80x80mm Alu.material |
| Load air cylinder | diameter 50mm, 4 pcs,stroke 300mm,max load force up to 1500N |
| Impact cylinder | diameter 50mm, 1pcs, stroke 400mm |
| Load air cylinder | diameter 80mm,1pcs,stroke 500mm, max load force up to 2500N |
| Force sensor | high precision sensor,capacity 2KN,4 pcs；5KN,1 pcs |
| Control way | touch screen + PLC control |
| Counter | 0~999999 times (can by adjusted) |
| Force adjust | precision pressure valve equipment with sensor to disply |
| Air supply | 7kgf/cm^2 |
| Power | 1∮ AC 220V 50Hz 5A |
Testing Standards
EN 527-3, EN581-3 and BIFMA X5.1, IS5967
EN 1725:1998 7.3 Durability test
EN 1725:1998 7.5 Durability of bed edge
EN 1725:1998 7.6 Vertical static load test
