|
[China]
Trade Verify
Address: No.1802 Room 6# Building Universal Commerce Center Nancheng District Dongguan Guangdong China
Contact name:Ivy Xie
SKYLINE INSTRUMENTS CO.,LTD |
|
Verified Suppliers
|
|
|
ISO15025 Protective clothing Flammability Tester
Instrument introduction
The protective clothing flame spread tester is developed according
to the ISO15025 test standard. It is mainly used for simulation technology assessment protective
clothing on fire danger of the spread of flame performance. It also
can measure limited flame spread properties of vertically oriented
textile fabrics and indurstial products in the form of single or
multi-component fabrics when subjected to a small defined flame.
Principle
The test principle is that the vertical suspension sample is ignited by the standard small flame for 10s, the continuous burning time, the smoldering time and the damage length are measured, and the flame retardant performance of the protective fabric is evaluated.
Technical parameter
| Flame Angle | 0°,30°,90° |
| Height of Flame | 25±2mm 40±2mm |
| Flame time | +/-1 s (can be adustable) |
| Precision for afterflame time & glowflame time | ±0.1s |
| Burn tube according to standard | ISO15025, with copper materail |
| Gas supply | Methane Gas |
| Dimension | L1200mmXW 900mmxH1300mm |
Performance characteristics
1. The protective clothing flame spread tester includes a burner, a
sample needle frame, a sample suspension support frame, a burner
control system, a human-machine interface display device, and the
like;
2. The test instrument can be upgraded to meet other test standard
requirements by equipped with different test pin frames, such as
ISO6941, ISO6940, etc.
3. The burner angle is controlled by a stepping motor, which can
automatically perform bottom edge ignition and edge ignition;
4. The burning test time can be set to 10s or other time;
5. Continuous burning and smoldering time, can be recorded
through the LCD display.
