Active Member
|
[China]
Address: The Third Industrial Area,Jingshan Village,Chashan Town,Dongguan City ,China
Contact name:
Dongguan Xinbao Instrument Co., Ltd. |
|
|
Drop Test Machine,Two Wing Type Drop Test Machine,High Quality Two Wing Type Drop Test Machine
Feature:
1. The spindle is used by precision grinding shaft lever, high
precision, good stability
2. LCD screen displays multi-parameter.
3. Power failure safety design, keeping the original state when the
power is failed.
4. Up and down lifting limitation setting
5. Adopt single arm supports test object.
6. Swing arm system is controlled by air pressure.
7. Free adjust pressure and speed up to 2G with object weight.
8. Test elctronic parts, finished products or angle surfae of the
package container.
9. Decompression change design, low noise.
10. Best after sales service: One year free parts maintenance.
11. Meet international test standards.
12. Customization is available & welcomed.
Techology Parameters:
| Model | XB-OTS-220B |
| Display Method | Digital height indicator (optional) |
| Drop Height | 400~1300 mm |
| Single-wing Area (W×L) | 350×760 mm |
| Drop Panel Area (W×L) | 1200×1400 mm |
| Specimen Max. Size (L*W*H) | 1000*1000*800 mm |
| Specimen Max. Weight | 640 Kg |
| Outside Dimension (L*W*H) | 1400*1200*1940 mm |
| Control Box Size (L*W*H) | 350*350*1100 mm |
| Weight | 400 Kg |
| Power | 1ph, AC220V/ 50Hz |
| Transmit Approach | Electric Transmission |
| Horsepower | 1/2 HP |
| Design Criteria | ISO 2248, JIS |
Introduction:
Package Impact Drop Testing Machineis used to measure the dropping impact incidence when the package in using, transportation and decorating. Labtone "1G+" project strictly ensure the accuracy. Besides precision plane drop testing, it also can undertake edge and angle test to ensure the complete performance evaluation for the package.
During the products handling or transport process, there may be drop/ fall, which results in damage within the products. And this Drop Tester simulates the drop/ fall of a finished product to evaluate the damage. All the rhombohedrons, angles and faces of the products can be tested.
