|
[China]
Trade Verify
Address: Hi-tech Developing Industrial Area, Liuyang City,Changsha,Hunan Province,China
Contact name:Sandy
Advanced Instruments Co.,Limited |
|
Verified Suppliers
|
|
|
Introduction:
The Pensky-Martens Closed-Cup Flash Point Tester is designed and manufactured as per standards GB/T 261-2008 Determination of Flash Point - Pensky-Martens closed cup method and ASTM D93 Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester.
The Pensky-Martens Closed-Cup Flash Point Tester is used to make determination of the closed cup flash point of the petroleum products.
Features:
1. It adopts LCD screen to display. Full English man-machine dialog
interface. It can preset the parameters of expected flash
point,sample mark number, atmospheric pressure, test date,etc.It
has menu to prompt and input function of guide type.
2. It adopts simulation tracking display the function curve of
temperature rising and test time.It has prompt functions of English
mis-operation,test date and test time.
3. It is equipped with standard RS-323,485 computer port.The lower
computer can save 100 groups of historical data. The test data can
be saved for a long time, transmitted and modified if the
instrument being connected with computer.
4. It can correct the influence of atmospheric pressure and
calculate the correction automatically.
5. Differential detection.Automatically correct the systematic
deviation.
6. Automatically open the lid,ignite,detect and print test data.The
test arm lifting up and down automatically.
7. The Pensky-Martens Closed-Cup Flash Point Tester adopts electric ignition to fire light the gas flame.It will
light only need to press the button.
8. Humanized design,beautiful and safe. Easy to operate.
Specifications:
1. Power supply: AC(220±10%)V,50Hz
2. Flash point determination: Range: Ambient to 300ºC ;
Repeatability: ≤3ºC; Reproducibility:≤6ºC; Accuracy:0.1ºC
3. Heating rate: Procedure A: (5~6)ºC/min, Procedure B:
(1~1.6)ºC/min; automatic control and manually adjustable.
4. Stirring rate: Procedure A: (90~120)RPM, Procedure B:
(250±10)RPM; automatic control and manually adjustable.
5. Igniting mode: Electric ignition. Gas flame diameter:3.2mm~4.8mm
6. Working condition: Ambient temperature: (10~40)ºC; relative
humidity:≤80%
7. Maximum power consumption: 500W
8. Dimension: 520mm*360mm*310mm
| 1 | Power supply | AC(220±10%)V,50Hz |
| 2 | Temperature measurement | Range: room temperature ~ 300°C |
| Repeatability :≤ 3°C | ||
| Reproducibility :≤ 6°C | ||
| Accuracy : 0.1°C | ||
| 3 | Heating rate | Procedure A : (5 ~ 6)°C /min |
| Procedure B : (1 ~ 1.6)°C /min | ||
| Automatic control and manually adjustable. | ||
| 4 | Stirring rate | (1) Procedure A: (90 ~ 120)RPM |
| (2) Procedure B: (250±10)RPM | ||
| Automatic control and manually adjustable | ||
| 5 | Igniting mode | Electric ignition. Gas flame diameter: 3.2mm ~ 4.8mm |
| 6 | Working condition | ambient temperature : (10 ~ 40)°C |
| relative humidity: ≤ 80% | ||
| 7 | Maximum power consumption | 500W |
| 8 | Dimension | 520mm*360mm*310mm |
Automatic Pensky-Martens Closed-Cup Flash Point Tester(ASTM D93):
