Vertical Flame Propagation Testing Machine
Introduction:
This test apparatus meets the standards IEC 60332-1-1:2004.Single
cable flame propagation test apparatus is used to test the
flame retardant property of the cable's insulating layer under
abnormal conditions such as overheat and overcurrent.It can be used
in vertical cable or fiber flame spread test,alsocanbe testthe
state of flaming droplets during combustion.
Standards:
- IEC 60332-1-1,2,3: testing the resistance to vertical flame
propagation for a single vertical electrical insulated conductor or
cable, or optical fibre cable, under fire conditions.
- EN 50086-1-1994:Specification for conduit systems for cable
management
Main features:
1, The touch screen intelligent control system; Operating interface
in English and Chinese;
2, The apparatus has functions of automatic ignition,
automatic timing, automatic data storage;
3, The test section and control section isconbineddesign in one box
for installing and operation;
4, Stainless steel test box,andthe internal cavity size is height
1200mm, width 300mm, depth of 450mm;
6, A pre-mixed burner, andinnerdiameterisФ12 ± 0.5mm, length is
100mm. 1kW mixed type standard burner, which canbe providesaccurate
test fire;
7, Flame time and duration of combustion can be adjusted from 0 to
99 minutes 99 seconds. Automatic control testing process;
8, Import needlevavleprecisely adjust the flame height, according
to standards, the blue flame height is 50mm ~ 60mm, total height is
170mm ~ 190mm;
9, The gas flow rate is controlled by needle valve;
10, Vertical Flame Propagation Test Apparatus is equipped with a
steeless flame height caliper;
11, With a gas flow meter and pressure regulator; automatic
ignition;
12, The burner angle canbe adjustbetween 45 ° and 0 °;
13, Flame check device for optional.