Home Companies Advanced Instruments Co.,Limited

ASTM D1665 Engler Viscometer Viscosity Tester Equipment With 2 Working Units

Contact Us

[China]

Trade Verify

Address: Hi-tech Developing Industrial Area, Liuyang City,Changsha,Hunan Province,China

Contact name:Sandy

Advanced Instruments Co.,Limited

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

ASTM D1665 Engler Viscometer Viscosity Tester Equipment With 2 Working Units

Country/Region	china
City & Province	changsha hunan
Categories	Solar Chargers

Product Details

ASTM D1665 Engler Viscometer

Summary

This engler viscometer is designed and made as per national standard GB/T266 Petroleum Products- Determination of Engler Viscosity, T0622 Bitumen Engler Viscosity Determination(Engler viscometer method) in national industrial standard JTG E20-2011 Standard Test Methods of Bitumen and Bituminous Mixtures for Highway Engineering and Shanghai enterprise standard Q/YXYY11 WNE-1 Engler Viscometer.

It is suitable to determine the rate of time(seconds) of liquid flow out from Engler viscometer and time(seconds) of distilled water flow out at 20℃ under certain temperature and cubage. This rate is the Engler viscosity. Unit is Engler degree.

I. Main technical features

1. The engler viscosity tester adopts desktop, all-in-one and double inner crucible structure. Both of inner and outer crucibles adopt stainless materials. Inner crucible has been specially processed. The smooth finish corresponds with the test requirements.

2. The flow out time of engler viscosity meter adopts digital display. Can do parallel determination for 2 samples at the same time. Easy to use and efficiency is high.

3. The temperature controller adopts digital display temperature controller with P,I,D position regulatory function. Easy to set the parameters and temperature controlling precision is high.

II. Main technical specifications

1	Power supply	AC(220±10%)V, 50Hz
2	Standard water value	(51±1)s
3	Temperature range	(0~100)℃
4	Temperature control accuracy	±0.1℃
5	Engler viscosity thermometer	Correspond with GB/T 514
6	Specification of measuring flask	(200±0.2) ml
7	Inner crucible	Stainless steel material
8	Timing	Max 999.9s
9	Timing mode	LED electronic timing
10	Heating power	700W
11	Ambient temperature	(-10~+40)℃
12	Relative humidity	≤85%
13	Dimension	430mm×410mm×620mm
14	Maximum power consumption	800W

IV.Package list

No.	Name	Unit	Qty	Remark
1	Engler Viscometer	Set	1
2	Temperature sensor	Piece	1	Installed in the instrument
3	Receiving flask (100ml)	Piece	2
4	Engler thermometer (0 ~ 50) ℃, scale division is 0.5 ℃	Piece	1
5	Engler thermometer (0～100) ℃, scale division is 0.1 ℃	Piece	1
6	Wooden stopper of viscometer	Piece	2
7	Fuse 10A(φ5×20)	Piece	2
8	Stopping ring for thermometer(1#)	Piece	2
9	Operating Manual	Piece	1