1. Volume (length× width ×height): 370mm×340mm ×1570mm 2. Weight: about 90kg 3. Power supply voltage: AC220V/110V 50HZ / 60 HZ ,Power: 1500W 4. Blood pump/spare pump: •Flux: 15 ~ 340ml/min (D 6mm) 20 ~ 460 ml/min (D 8mm) 5. Heparin pump: •Flux: 0ml/h~10ml/h(±5%) 0.1ml/h•Precise: Injector size: 20ml/30ml/50ml 10ml/20ml/30ml (selectable) 6. Arterial pressure: •display scope:-300mmHg~+300mmHg (±10mmHg) 7. Venous pressure: •display scope:-50mmHg~+300mmHg (±10mmHg) 8. Dialysate flow: 300ml/min~800ml/min linearity adjustable (+10%) (-5%) Temperature:35.0℃~39.0℃ Resolving rate:0.1℃ Conductivity:13mS/cm~15.5mS/cm (±0.1 mS/cm) 9. UF flow scope: 0~1800ml/h(±30ml/h ) 0~4000ml/h(optional) 10. ISO UF flow scope:0~2000ml/h(±30ml/h) 11. TMP: Scope:-100mmHg~+600mmHg (±20mmHg) 12. Blood leakage monitor: over 1ml blood per liter dialysate (flow:500ml/min) 13. Blood level monitor: ultrasonic sensor 14. Air bubble monitor: Infrared and response threshold value: Single air bubble of 200 и I exists when Blood flux is 200ml/min 15. Inflow pressure:0MPa~0.6MPa 16. Inflow temperature: 5℃~30℃ 17. Environment temperature: 10℃~30℃, Relative humidity≤70% 18. Rinse/disinfection: chemical disinfection (citric acid,peracetic acid and oxalic acid) 19. Hot rinse: 80℃ 20. Back-up power supply: last for 15-30min after electric-cut. |