Active Member
|
[China]
Address: Zone C, 2 / F, building 3, 69 Huafang Road, Qingpu District, Shanghai, China
Contact name:iven
shanghai kerang technology co ltd |
|
|
IPX9 Waterproof Test Equipment HH0807
Standard:Clause 14.2.9 of EN60529:1992+A2:2013, ISO 20653-2006, ISO30653-2006, clause 4.9.2of QC/T 417.1-200, clause 6.2.7 and 6.2.8 of TOYOTA ENGINEERING STANDARD TSC1000G. DIN40050-9 IP degrees of protection provided by enclosures for the electrical equipment in road vehicles for protecting the electrical equipment inside the enclosure against the effects of the ingress of solid foreign objects, including dust (protection against foreign objects),protecting the electrical equipment inside the enclosure against the effects of the ingress of water (protection against water).
Application:It is used to inspect the IEC enclosures for the electrical equipment (IP supplementary code test), and it is applicable for waterproof testing of the electrical and auto parts under high temperature and high pressure.
Test sample:With IPX9 degrees waterproof test products, such as automobile and motorcycle parts, electrical and electronic industries.
Feature: The equipment is consists of heating water tank, high pressure plunger pump, high pressure solenoid valve, fan nozzle, turntable and so on. Firstly, heat the water in the water storage tank to required temperature, secondly, mount the sample on the turntable, adjust the position of the nozzle, thirdly, close the protective door of the test equipment, set all test required parameters, finally, start the test. The four nozzles spray for 30 seconds in order during the test.
Parameters:
| Test Water Temperature | 80±5 ℃ |
| Nozzle specification | It is designed according to the standard figure |
| Nozzle number | 4(0°,30°,60°,90°) |
| Spray pressure | 8MPa-10MPa(adjustable) |
| Spray flow | 14l/min-16l/min (change according to pressure) |
| Spray distance | 100～150mm adjustable(The maximum side of the test product shall not exceed 450mm) |
| Sample support platform | ￠400mm |
| Sample support platform rotate speed | 4-6r/min |
| Sample support platform bearing | ≤15kg |
| Sample support platform lift | 300mm～400mm (Manually) |
| Power supply for test sample | Provide interface for test product, 4 core wire power supply, the maximum 30A |
Picture for reference:
Our Service
7X24-hour Telephone Consulting Service is available.
Reply and solution will be provided in 8 hours upon customer’s service request.
After-sales Support is available on a 7X24-hour basis, leaving no worries for customers.
Quality inspection from raw material to production, and delivery.
Professional quality control person, to avoid the unqualified products flowing to customer.
Strict inspection to Raw material, production, and delivery.
Full series of equipment in quality laboratory.
Our Team
Responsibility is the assurance of quality, and quality is the life of corporation. We are looking forward to long term cooperation with customers, we will make best service and after sales service for all of our customers. If you have any inquiry, please don’t hesitate to contact us. We will reply you at the first time as we can.
