Hematology Analyzer Reagents CD-1800 Analyzer Use Medical Analyzer Reagents

Specification

KIT COMPOSITION

PROCEDURES

• Using the function keys press the following menus:

MAIN-SPECIAL PROTOCOLS-REAGENT RESERVOIRE-EMTY DILUENT

• Remove the reagent inlet tube from the Diluent.
• Wipe the tube’s surface with a lent free tissue, and then rinse with distilled water.
• Put the reagent tubes into the boxes and/or bottles of Labnovation reagents.
• Using the function keys press the following menu:

FILL DILUENT

This step will fill the reagent system with Labnovation reagent.

• Repeat steps 1-5 with Lyse and Sheath.
• Run at least 5 backgrounds. Check for the acceptable values.
• Run all three levels of a dedicated commercial control. Check for the acceptable values.
• Recalibrate the unit if necessary. (MAIN-CALIBRATION-ENTER-FACTOR)

• One source for all brands of analyzer 
• Reagents for both 3-parts and 5-parts
• Ready-to-use final products and bulk OEM reagents
• ISQ13485:2003 and ISO9001:2008 certified
• CE marked, FDA cleared
• Well-established brand used by thousands of lab in 95 countries
• High quality, high performance and high fidelity of correlations with original brand