Beijing Samyon Instruments Co., Ltd. |
|
Accurate Measurement Steel Ruler Water Level Gauge
Instruction
During measurement, after the coil has been rotated, press the
power, and put the probe into the water pipe, then hold the steel
ruler cable, let the probe moves down slowly.
The sounder will gives a continuous beep when the contact point
touches the water surface, then can read the depth of the steel
ruler at the pipe mouth, that is the distance from the underwater
level to the pipe mouth .
Parameters
Specification | 30 | 50 | 100 | 150 | 200 | 300 | 500 |
Measurement dept(m) | 0~30 | 0~50 | 0~100 | 0~150 | 0~200 | 0~300 | 0~500 |
Minimum reading(mm) | 1.0 | ||||||
Repetitive reading(mm) | ±2.0 | ||||||
Operating voltage (V) | DC=9 |
Maintenance
Due to the battery capacity, please turn off immediately after the
measurement is completed! Remove the battery cover and replace the
battery (9V battery, multimeter battery).
Keep the probe and the steel ruler cable clean after use, and put
the steel ruler cable neatly around the reel, and be placed in the
cabinet.
Don’t bend the measuring cable , especially when it is close to the
head, to avoid the cable to be damaged.
Put the probe gently to avoid severe vibration. If the probe got
any problem, please send back to our factory.
Pictures