Single Chip Machine System Micromethod SY-17144 Auto Carbon Residue
Tester
Summary
This instrument is designed and made as per ASTM D4530 and
GB/T17144-1997 Standard Test Method for Carbon Residue of Petroleum
Products-Micromethod. It is suitable to determine the the amount of
carbon residue of petroleum products.
I. Main technical features
1. This instrument adopts all-in-one structure. It consists of two
parts: electrical control chamber and high temperature heating
furnace. The design is simple and reasonable.
2. It adopts single chip machine system. The instrument controls
the whole procedures automatically according to program preset.
3. The screen adopts all English interface. Operator can do
determination by prompts on the screen even no need to read the
operation manual. Easy to operate.
4. It controls the flow rate of nitrogen, temperature heating rate
and preset temperature automatically. Easy to adjust the flow rate.
The heating rate is accurate and temperature control is stable.
5. It collects test data and calculates results automatically. It
can print and save the data according to customer’s requirements.
6. The measurement range of this instrument is
0.10%(m/m)~30.0%(m/m). The test result is equivalent to Conradson
method if the carbon residue is higher than 0.10%(m/m).
7. The instrument can also be used to determine the petroleum
products composed of distillate oils which carbon residue is lower
than 0.10%(m/m). But the specimen shall be sampling to
10%(V/V)distillation residue according to GB/T6536 firstly.
8. It equips a electric balance to achieve the automation of sample
weighing and data input.
II. Main technical specifications