Active Member
|
[China]
Address: Suolide International Science and Technology Park, Wuxi, Jiangsu
Contact name:Andrew
Serve Real Laboratory Co |
|
|
Optional Large Screen High- Precision Stainless Steel 1100 Degrees Small Tube Furnace At Precision
Product Description
This series of products is mainly aimed at the heat treatment of samples in vacuum or protective atmosphere, high-quality furnace materials and stable temperature control system, which can ensure the reliability of experimental data;The product adopts the new ceramic fiber material as the furnace material, the furnace tube material is excellent, the two ends of the furnace tube are sealed with stainless steel flange, which can work under vacuum, the flange has an air inlet and an air outlet, which can pass into the protective gas, and the precision needle valve can adjust the air inlet flow.
Product features
1.The integrated design optimizes the furnace structure and saves space
2.The furnace material is made of high purity alumina ceramic fiber material, which is not easy to deform at high temperature and has good thermal insulation performance
3.Double shell construction, equipped with air cooling system, shell temperature at room temperature +10℃
4.Intelligent PID control instrument, 30 programmable program, constant temperature time control, automatic shutdown, etc
5.Instrument temperature control accuracy is high, accuracy within 1000 degrees ±0.1 ° C; ±1℃ above 1000 ° C
6.With open power function, temperature alarm function, leakage protection function and over temperature protection function
7.Optional large screen paperless recorder to achieve real-time recording of the temperature curve, and with a memory card to analyze and print the experimental data
Specifications
| Model | MLG-203-11 | ||
| Performance | Quartz tube size | Φ30*600mm(Pipe diameter optional :40,50,60mm) | |
| Temperature control range | Room temperature -1100℃ | ||
| Operating temperature | ≤1000℃ | ||
| Heating zone size | 200mm | ||
| Temperature control accuracy | ＜1000 ±0.1℃ ; ≥1000±1℃ | ||
| Heating rate | Recommended below 1000 degrees ≤10℃/min, the fastest heating rate ≤30℃/min | ||
| Cooling rate | Above 700℃ ≤10℃/min | ||
| Furnace surface temperature | The surface temperature of the furnace body is less than room temperature +10 (the measuring point is 1000℃) | ||
| Composition | Outer covering | Cold rolled steel plate, surface resistance coating | |
| Furnace | Ceramic fiber furnace (heating element integrated) | ||
| Sensor | 1200 degrees K type thermocouple | ||
| Heating element | Iron chromium aluminum alloy resistance wire | ||
| Cooling vane | Axial fan | ||
| Furnace structure | Double shell construction with air cooling system | ||
| Controller | Control mode | PID control | |
| Set representation | Digital setting/digital display | ||
| Overtemperature protection | Integrated controller type | ||
| Overtemperature setting | Digital setting | ||
| Operation function | Custom run/Program run (30 sections of program temperature control) | ||
| Additional function | Deviation correction, power failure compensation, lock key function | ||
| Timer | 1 min-99 hours 59 min and 999 hours 50 min digital setting, automatic operation, fast automatic stop | ||
| Vacuum system | Vacuum degree | 1.Optional mechanical pump, up to 10-2 pa
2.Equipped with our company (mechanical pump and molecular pump) combination high vacuum system, the power can reach 1.33 * 10-4 pa (empty furnace state)
| |
| Thermal insulation pipe plug | 2 pieces of alumina material | ||
| Furnace tube | Quartz tube | ||
| Vacuum column | Stainless steel vacuum flange | ||
| Pressure gauge | -0.1 to 0.15mpa | ||
| Security | Working environment | RT±5-40℃ | |
| Use security | Open the door power off function, over temperature alarm function, leakage protection function, over temperature protection function | ||
| Specification | Furnace structure | Horizontal type | |
| Power supply voltage | 220V50HZ | ||
| Input power | 1.5KW | ||
| Equipment size(D*W*H) | 300*300*490mm | ||
| Weight(KG) | 18 | ||
Ordering information
| Model | Maximum temperature(℃) | Pipe diameter(mm) | Heating element |
| MLG-203-11 | 1100 | 30 | Resistance wire |
| MLG-204-11 | 1100 | 40 | Resistance wire |
| MLG-205-11 | 1100 | 50 | Resistance wire |
| MLG-206-11 | 1100 | 60 | Resistance wire |
About us
We are professional manufacturer & supplier specialized in Civil Engineering, Material testing, Lab equipments since 2003. We can manufacture & Supply various kinds of testing equipments under standards of ASTM/AASHTO, ISO, EN, DIN, BS, JIS, as well as other specialized industry standards. Our customers have spreaded to over 90 countries & areas since company established.
Our advantages
With our strong background and over 20 years rich experience in the materials test equipment industry, we can know more about our customers requirements and give our more professional advises, thus the presales communications will be easier and faster, so that can improve working efficiency of our valued customer.
Our business philosophy is long termism and focus, so we value product quality more, we will not cut corners in manufacturing, in every delivery, we hope our customer will be satisfied with the product quality.
Our regulations for after-sales service: fast response, friendly attitude, No excuses, must be settled
Similar Product
