|
[China]
Trade Verify
Address: 5th Floor, Building 2, Chunhu Industrial Zone, Pinghu, Dongshen Road, Longgang District, Shenzhen, Guangdong, China
Contact name:Steve
SHENZHEN KXIND COMMUNICATIONS CO.,LTD |
|
Verified Suppliers
|
|
|
Single Mode Simplex Inline Variable Fiber Optic Attenuators 0-30db With Connector LC/UPC
1 Single Mode Variable Optical Attenuators allow the user to manually vary the attenuation of the signal in the fiber as it is transmitted through the device. These VOAs can be used to to precisely balance the signal strengths in fiber circuits or to balance an optical signal when evaluating the dynamic range of the measurement system. The maximum specified attenuation is achieved within 10 turns of the adjustment screw.
2 All in-line VOAs have single mode fiber pigtails with a Ø3 mm jacket. The VOAs are offered unterminated or terminated with 2.0 mm narrow key LC/SC/ST/FC/PC orLC/SC/ FC/APC connectors.
3 Each attenuator has a lens to collimate the light from the input fiber. A blocking device or window can be manually adjusted by a screw
4 Then, a second lens is used to couple light into the output fiber. Thus, the coupling efficiency is changed until the desired attenuation is obtained.
| arameter | SM(9/125) | MM(50/125,62.5/125) | ||
| Attenuation values | 1dB to 20dB(1dB step),25dB,30dB | 1dB to 25dB(1dB step) | ||
| attenuator Wavelength | 1310nm & 1550nm | 850nm &1300nm | ||
| Attenuation Tolerance (dB) | 1-10dB<±1.0dB ( typical ) standard | 2dB,5dB,10dB<±1.0dB(typical ) standard | ||
| 11-25dB<±10% ( typical ) standard | 15dB<±10% ( typical ) standard | |||
| 1-10dB<±0.5dB ( typical ) premium | 2dB,5dB,10dB<±0.5dB(typical ) premium | |||
| 11-25dB<±5% ( typical ) premium | 15dB<±5% ( typical ) premium | |||
| attenuator Return Loss | PC | ≥45 dB |
/ | |
| UPC | ≥55 dB | |||
| APC | ≥65 dB | |||
| Attenuator mode | Fixed type, male to female type, In-line type, Variable type | |||
| attenuator Operating Temperature | -40°C~+75°C | |||
| attenuator Storage Temperature | -40°C~+85°C | |||
