Chengdu Yibai Technology Co., Ltd. |
|
Woodworking Tools Helical Cutter Head with Indexable Carbide Inserts
Product Information
With the development of technology, the spiral cutter head has gradually replaced the traditional flat knife and four-sided planer. The spiral cutter head more scientifically distributes the planing points evenly to each machining blade, while finely adjusting the angle between the blade and the working surface, which can be easily adjusted to suit different materials.
Product Characteristics
1. Replacing knives is easy and doesn’t require alignment: As you
can see in the picture above, all knives are fastened with a screw
through a hole in the center of the knife. The knives are sitting
in a matching pocket that keeps the knife in perfect alignment.
When installing new knives, simply let the screw guide the knife
into the correct spot.
2. Your dust collection system works better: When you are cutting a
10 inch wide board in your planer with a standard cutter head, you
create 10 inch wide wood chips that your dust collection system has
to suck up. The KWS HELIX head only cuts 15mm (about ½ inch) at any
given time and therefore, the wood chips are much smaller. Smaller
wood chips are much lighter in weight which is why your dust
collection system sucks them up much easier.
3. Necessary replacements of knives cost a fraction in most cases:
When knives become dull, you have to re-sharpen or to replace them.
In actual fact, most replacements become necessary when a hidden
nail or rock in the wood chips out your knives and they now leave
ugly and uneven patterns in the wood. When this happens with a KWS
HELIX head, usually only one or 2 small knives are affected. As the
knives are sharp on all four edges, a simple turn of 90 degrees
solves the problem without a knife replacement.
Product Specification
NO. | SIZE |
1 | 90*35*H(60-130)*6T |
2 | 100*40*H40*6T |
3 | 100*35*H(60-120)*6T |
4 | 125*40*H(60-150)*6T |
Note
1. Heavy & Light duty is available.
2. Heavy duty:37°, Light duty: 30°.
3. Other specifications are available upon request.
Details Images