Active Member
|
[China]
Address: No.369 Kangzhuang Road Zhoushi town Kunshan City China
Contact name:Tong Wang
KUNSHAN WONDERTEK TECHNOLOGY CO.,LTD. |
|
|
DIN rail industrial powerline Ethernet bridge
1Gbps G.hn WD-1000M-GD(800V)
Brief introduction
DIN rail industrial PLC Ethernet bridge is a powerline telecommunication product
which being developed by WonderTek Technology (KunShan) Co.,LTD., it supports the G.hn protocol and the actual bandwidth up to 400Mbps. The product has been widely used in many aspects just as railway, mines, industrial telecommunication
and metro etc..
1.1 Highlight
1.1.1 Technical parameters
Support G.hn.
Industrial DIN rail style installation
Actual bandwidth up to 400Mbps
The maximum transfer distance up to 1000 meters
Self-adapt the rate
Compatible with all G.hn devices
One Domain Master can manage 15pcs End Point.
There can be 16 groups(16 different Domain Master) of PLC telecommunication devices in the same power line circuit.
1.1.2Manageability
Support Remote Firmware update(TR069)
802.3D Ethernet Bridge.
802.1Q VLAN.
Quality of Service(QoS) .
IGMO(IPv4)Snooping &MLD(IPv6)Snooping
Support local web management
1.1.3Operating environment
Working temperature: -40℃-80℃.
Operating humidity: 10%-85% no condense
Storage humidity:5%-90% no condense
1.1.4Design standards
ITU-T G.9960
IEC 60529
IEC 50022
IEC 60068-2-6
MIL-STD-810G
| Model | WD-1000M-GD |
| Interface | 1*LAN 10/100/1000Base-TX self adaption RJ45,1*DC power interface MDI/MDX support |
| LED display light | Ethernet, PLC link ,power |
| Transfer band | 25,50 and 100MHz and MIMO (based on G.9963) |
| Protocol(PHY) | IEEE802.3,IEEE802.3x, IEEE802.3u G.Hn |
| Security | 128-AES |
| Transfer rate(PHY) | 800Mbps |
| Modulation | OFDM |
| Effective transfer rate | TCP/IP 400Mbps |
| Manageability | Remote Firmware update,support TR-069(optional) |
| 802.1D Ethernet Bridge | |
| 802.1Q VLAN | |
| Quality of Service(QoS) | |
| IGMO(IPv4)Snooping&MLD(IPv6)Snooping | |
| Working voltage | 12V-800V |
| Operating temperature | -40℃-80℃ |
| Size | 67*160*123 (mm)(L×W×H) |
| Weight | 0.30kg |
| Operating environment | Operating humidity:10%-85% (no condense) |
| Storage humidity: 5%-90%(no condense) | |
| Certification | FCC,CE class B,WEEE,RoHS |
1.2Features
Packet loss:≤0.1%(100M,load70%)
Support 7*24 hours all weather operation
hardware watch dog function
PING≤2MS
The quantity of the group ≤16pcs
1.3Immunity of ESD
The testing voltage which the device should be beared: ±6kV direct Discharge, ±8kV
air discharge. Discharge number in Each sensitive testing point: Plus-n-Minus 10 times each, Every time the discharge interval is 1 s, according to B/T 17626.2-2006.
1.4Immunity of electrical fast transient impulse group (Common mode)
The testing voltage which the device should be beared: between the power supply voltage port and ground: ±2.0kV, between signal circuit and ground: ±1.0kV, repetition frequency: 5KHz, test duration: 1 min/ time, testing times: Plus-n-Minus 5 times each. According to GB/T 17626.4-2008.
1.5Anti interference of surge impact
The testing voltage which the device should be beared: ±2kV, the interval of
continuous impulses: 1min/time. Test number: Plus-n-Minus 5 times each. According
to GB/T 17626.5-2008.(protection: all models protection and varistor series of
discharge tube type)
1.6Anti- vibration
Meet the demand of MX3 in TB1433(0-200Hz,2g acceleration, maximum amplitude
7mm), interface with no loose, device with no Sealing off and drop in the test.
1.7System topology
Application:
Smart Home, IoT, Automated Container Terminal, Factory Automation,
Smart Car Parking Lot
