0.77w ELM327 Bluetooth Diagnostic Scanner KONNWEI KW910

ELM327 engine scanner for all OBDII cars trucks OEM customized KONNWEI KW910 bluetooth

konnwei catalog-official- new arrival.pdf

Description

KW910 bluetooth OBD2 scanner is able to detect and interpret these protocols automatically.

It can connect only Android phones 

It also provides support for high speed communications and a low power sleep mode.

It use AT commands to communicate with a host device 

There are plenty of software packages available, which are fully compatible with KW910.

Some of them have pretty useful features, such as engine running parameters monitoring, DTC reading and clearing, MPG meter, etc.

ou can even write your own software on a specified hardware platform if you wish, because the AT commands are fully documented and very well explained.

The measuring only 2.7 x 1.25x 0.9 inches

It also comes included with a power switch built-in to prevent the need for having to constantly disconnect your unit from the OBDII port.

It is compatible with 1996 and later vehicles.

Feature

Compatibility - Our OBDII reader will work on all vehicles purchased in the USA model year 1996 or newer; Unlike other OBD2 readers, ours works on all OBD2 protocols including J1850 and CAN

1 Year Warranty - For 2 years you will be covered by our warranty against all manufacturing defects; With a hassle free claims process and friendly USA based support you cannot go wrong

Monitor & Analyze - A must have tool for any DIY mechanic; You can read and clear your check engine light and monitor different vehicle sensors in real time to better locate your problems

IMPORTANT – Please follow ALL setup steps indicated in instructions for a successful connection! This OBD2 scanner does not read ABS, SRS, TPMS, Oil Change or any other non-OBDII related lights

0. Work on all 12V Gasoline / diesel vehicles/hybrid EV

1. Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).

2. Clear trouble codes and turn off the MIL ("Check Engine" light)

3. Display current sensor data, including:

4. Engine RPM

5. Calculated Load Value

6. Coolant Temperatur

7. Fuel System Status

8. Vehicle Speed

9. Short Term Fuel Trim

10. Long Term Fuel Trim

11. Intake Manifold Pressure

12. Timing Advance

13. Intake Air Temperature

14. Air Flow Rate

15. Absolute Throttle Position

16. Oxygen sensor voltages/associated short term fuel trims

17. Fuel System status

18. Fuel Pressure

Specification

Support Cars

(1)American Car,Works on OBD2 car from 1996 to now:

Chrysler / Ford / GM / Jeep

(2)European Cars, Works on obd2 car from 2003 to now:

Alfa Romeo / SAAB / Acura / Opel,

Audi / Seat / Peugeot / Renault

Bentley / Skoda / Daewoo

Benz / Daihatsu / Land Rover

BMW / Vauxhall / Citroen

Volvo / Fiat / VW / Ford / Jaguar

(3)Asian Cars, Works on obd2 car from 2008 to now:

KIA , / Isuzu / obd2 Honda ,

obd2 Mitsubishi, / obd2 Hyundai / obd2 Dacia ,

obd2 Lexus / obd2 Mazda / obd2 Nissan,

obd2 Subaru , / obd2 Suzuki/ obd2 Toyota

(4)Other brands of OBD2 cars since 1996

support protocol

1.SAE J1850 PWM(41.6Kbaud)

2.SAE J1850 VPW(10.4Kbaud)

3.ISO9141-2(5 baud init,10.4Kbaud)

4.ISO14230-4 KWP(5 baud init,10.4 Kbaud)

5.ISO14230-4 KWP(fast init,10.4 Kbaud)

6.ISO15765-4 CAN(11bit ID,500 Kbaud)

7.ISO15765-4 CAN(29bit ID,500 Kbaud)

8.ISO15765-4 CAN(11bit ID,250 Kbaud)

9.ISO15765-4 CAN(29bit ID,250 Kbaud)

A.SAE J1939 CAN(29bit ID,250*Kbaud)

B.USER1 CAN(11*bit ID,125*Kbaud)

C.USER2 CAN(11*bit ID,50*kbaud)

packing list

1x kw910 bluetooth mini scanner

1x user manual

1x CD