|
[China]
Trade Verify
Address: 7018,De Rong Mansion,He ao,Longgang,ShenZhen,GuangDong Province,China
Contact name:Joe.Gong
Shenzhen Konja Green Power Technology Co.,Ltd |
|
Verified Suppliers
|
|
|
Based on lithium iron phosphate battery(LFP) and power conversion technology, KonJa Energy designed the modular containerized battery energy storage system (BESS),which was successfully used in manyscenarios, such as frequency regulation of power plant, peak shifting of user side, and micro grid applicationwith wind power & solar power.
1. Highly modularized design make it easy to be transported, installed,constructed and maintained.
2. Reasonable and design enables the system to be operated under
various scenarios
3. Battery System:4-evel design makes them easy to be monitored and
controlled: Cell level, Module level, Rack level and
Containerlevel:
4. BMS: Ensures the battery system to run in a "healthy" condition
by monitoring and controling the current, voltage,temperature and
other relative parameters of each cells, modules, racks and
containers.
5. Cooling system: Using a set of precision air-conditioners to
keep the temperature inside the container around 25 "c.
6. Lighting system: lncluding emergency light and lighting, are
available in the allcontainers
7. Fire system: FM 200, an advanced automatic fire extinguishing
system with audible and visual alarm, is installed inthecontainer.
The container can be hermeticallv sealed by the automatic shut-down
svstem once the fre extinguishing svstem isactivated.
| Parameter Details | |
|---|---|
| Type of Container | 20 HC |
| Max. Capacity | 3.01Mwh |
| OptionalCapacity | 2.67-3.01Mwh |
| Adaptive voltage range | 1000- 1500V |
| Charge and Discharge Ratio | 0.5CP |
| Battery Cell Parameter | LFP 2 80Ah |
| Module Parameter | LFP-38.4V-560Ah-21.504kWh |
| Cycle Life | 8000 Cycles(90%DOD.>70%EOL) |
| Cycle Efficiency | >94% (DC Side ) |
| BMS Scheme | Active Equalization+ Three- level Architecture |
| Communication Interface | Ethernet/RS- 4 8 5/CAN |
| Communication Protocol | Modbus-TCP/IEC61 8 50 104 |
| Temperature Control Scheme | Intelligent Variable Frequency Air Cooling |
| Fire Extinguishing Scheme | Gas/ Smoke/ Temperature Detection+ Heptafluoropropane+ Water+
Perfluorohexanone( Optional) + Active Air Exhaust |
| Insulation Resistance | > 10MΩ |
| Auxiliary Power Supply | AC380V-50HZ |
| Altitude | <5000m (> 3000m Capacity Reduction) |
| Allowable Ambient Temperature | -40~+55.C |
| Allowable Relative Humidity | -0 - 95%Rh ( without Condensation ) |
| Ingress Protection | IP65 |
| Corrosion- proof Grade | C4 (C5 Optional) |
| Dimension ( L* W*H) | 6058*2438*2896mm |
| Full Weight | 28T |
| Product Certification | GB/T36276 ,GB/T34131 ,UL1973 ,UL9540A ,IEC62619 ,UN38.3 |
The Container Energy Storage System is securely packaged to ensure that it arrives to its destination in good condition. The system is individually packaged in a box or crate. All parts and components are secured within the box or crate with high-quality cushioning material. Extra cushioning material is used to fill in any empty spaces within the box or crate and to secure the box or crate to its destination.
The shipping method for the Container Energy Storage System will depend on the final destination. If the system is to be shipped to a residential destination, it will be shipped via ground delivery. If the system is to be shipped to a commercial destination, it will be shipped by air or sea, depending on the size and weight of the system.
