|
[China]
Trade Verify
Address: Zhongdaliang Industrial Zone, Anping County
Contact name:Amy
Anping Yuanqiao Petrochemical Equipment Co., Ltd |
|
Verified Suppliers
|
|
|
Demister Pad brief introduction
The Demister is an assembly of Yuanqiao knitted wire mesh supported on, and held down by, high open area grids. It is made to any size and shape and may be installed in all new and existing process vessels.
Demister pad filter mesh for gas and liquid serves well in
filtering and deleting the particle mixture in foam, liquid and
air, by way of distillating, absorbing, evaporating and filtering
process, in petroleum, chemicals, metallurgy, machine,
pharmaceuticals, automobile and environmental protection.
Demister units can be engineered to fit the smallest laboratory
still, the largest refinery or petrochemical tower.
Demister PadSpecifications
| Material | Stainless steel (AISI201,202,301,302,3041,304L,321/316L) Galvanized wire, bronze wire,Phosphor wire, Nickel wire |
| Wire Diameter | Common diameter:0.2-0.28mm |
| Aperature | All can be customized |
| Mesh Width | 40mm, 80mm, 100mm, 150mm, 200mm, 300mm, 400mm etc. |
| Surface Condition | Flat Type mesh,Corrugated Mesh surface or twill. |
| Woven Type | Single wire,double wire,multi wire,etc. |
| Wire Strand | Single Wire, double strands, muitiple strands |
| Feature | High strength and stability. High filtration efficiency. Good shielding performance. Corrosion and rust resistance. Acid and alkali resistance. Durable and long service life. |
Demister Pad Application:
Wire mesh demister can not only filter bigger liquid foam suspended
in the air, can also filter out small and tiny liquid foam. It is
widely used in the Gas-liquid separation device of chemical,
petroleum, tower manufacturing, pressure vessel and other
industries.
Demister Pad Manufacturing Process
Firstly, we prepare the knitted wire mesh, according to the requirement of material, wire diameter, mesh density, etc. They are used to make the mesh pad of demister. In Hualai, we have our own knitting mesh work shop with dozens of different machines. In addition to providing tons of various kinds of knit mesh to our demister department each month, this workshop can also fulfill external orders.
Secondly, we weld the demister grids. They may be finished in any
shape or size, according to the order and production arrangement.
Usually big demisters are divided into proper small segments, to
allow them to be installed through the tower man hole. In most
occasions, the grids are builded in the same material with the
mesh. But they can also be different as per the order design.
Thirdly, our workers make mesh pads with multi-layers of crimped
knitted wire mesh, and join it with the grids on both top and
bottom sides. Now a piece of demister is finished. As a process of
checking, the whole demister will be pre-joint before packaging.
Lastly, the qualified demister segments are packed into a wooden
box and ready for delivery. Other package methods can also be
negociated, like pallet for FCL container, cartons for small
demister. OEM service is available and welcome, too.
Demister Pad Material we usually use:
PP, PTFE, SS304, SS304L, SS316, SS316L, SS201, SS202, SS301S, SS321, Copper, Nickel, Titanium, Duplex 2205, Duplex 2507, NS-80, Monel 400 alloy, Co-knit 904L+fiber glass, Co-knit 316L+ fiber glass, Co-knit 316L+PP flat... Other materials are available as per order.
Welcome your inquiry with Demister Pad specifications.
