Active Member
|
[China]
Address: Room 301-302, 3rd Floor, Comprehensive Building, Tsinghua Information Hi-tech Park, North Science Park, Nanshan District, Shenzhen ,China 518052
Contact name:Ava Tian
Shenzhen Kingwo IoT Co.,Ltd |
|
|
NT08EF is a 2G 4G AGPS LBS WIFI GPS Position Big Battery Smart Inventory GPS Trackers , it has built in Wifi and Bluetooth for indoors inventory tracking and management.
Features:
1. Robust design, industrial standard
2. World wide bands connectivity
3. AGPS Wifi, LBS ,Bluetooth tracking
4. Motion detect and vibration alarm
5. Geofence alarm
6. Periodic tracking
7. Magnets and screws
8. 20000mAh Ion battery
Specifications:
| Physical | Dimension | 154X82X31mm(L*W*H) |
| Weight | 495±8g | |
| Cellular | Communication module | Quectel BG95 M3 |
| Frequency | Working frequency: Cat M1: LTE-FDD
B1/B2/B3/B4/B5/B8/B12/B13/B14/B18/B19/B20/B25/B26*/B27/B28/B66/B85 • Cat NB2: LTE-FDD
B1/B2/B3/B4/B5/B8/B12/B13/B18/B19/B20/B25/B26*/B28/B66/B71/B85 • EGPRS: 850/900/1800/1900MHz protocol: Embedded TCP/IP stack Sensitivity: -107dBm@850/900MHz -106dBm@1800/1900MHz Output power: Class 4 (2W)@850/900MHz Class 1 (1W)@1800/1900MHz GPRS data: GPRS Class 10, Mobile Station Class B | |
| GPS | Channels: 50 Sensitivity: -147dBm Position accuracy:5-10m Accuracy: 5m CEP Cold start: <27s Hot start: <1s | |
| Processor | STM | |
| Motion sensor | DA260 | |
| Wifi position | Wifi 4.0 | |
| Bluetooth | Bluetooth 5.0 | |
| Power | Battery | Disposable Lithium-ion battery and (3.6V,20000mAh) and ultra-low discharge rate:less than 1%, store one year below 25℃ |
| Power consumption | Average working current <100mA; Power save current 107uA; | |
| GSM antenna | Internal High Gain | |
| GPS antenna | Internal High Gain | |
| SIM | Microsim | |
| Indicator | 2 status LEDs, Green: GPS, Red: Celluar(Inside enclosure) | |
| Environmental Parameter | Working Temperature | -20℃ ~ +70℃ |
| Humidity | 5% ~ 95% (no fog) | |
| Ingress Protection Rating | IP67 | |
| More features: |
• Hardware definition
| Enclosure | IP67 waterproof |
| Magnets | To stick the device to metal surface |
| Power button | Inside the enclosure for hidden installation purpose, to turn on or turn off device |
| Light sensor | To detect removal alarm ,remove the sticker on the light sensor, when the device expose to light, it will trigger a removal alarm |
| Temperature sensor | To measure the environment temperature |
| Motion sensor | To detect the motion or static status of the device, detect motion alarm and collision alarm |
• Temperature detect
The device built-in temperature sensor, it detects the temperature once the device is turned on, then will read it every 16 seconds. The temperature accuracy 95%.
• Wifi
The device has built in Wi-Fi Chip, it automatically connects to the WIFI hotspot nearby and filter the hotspot info then select the WIFI hotspots with strongest signal, the device will pack those hotspots info and saved into the packet that will be uploaded, after the backend receives Wi-Fi information, it will interpret the WIFI info and acquire the current location from the Wi-Fi database, The default setting is WIFI priority, once it detects WIFI Hotspot, it will upload WIFI info only , and do not use GPS, if WIFI is not detected, it will use GPS to position.
Q1. Can you help for design?
A:Yes,we have our own software and hardware engineer,you can give your idea to us,we can assist the design work.Provide sample for your reference.
