Shanghai Yiqiang Industrial Co.,Ltd |
|
Cylindrical roller bearings features
1 roller and raceway contact or repair offline contacts, radial
load capacity, suitable to withstand heavy load and shock load.
2 small friction coefficient, suitable for high speed, speed close
to deep groove ball bearings, inner or outer ring detachable, easy
installation and removal.
3. N type and NU type can move axially, to accommodate misalignment
due to thermal expansion or of the shaft and the housing due to
changes in relative position, can be used for supporting the free
end.
4 pairs of shaft or housing bore machining higher, bearing outer
ring axis relative deflection after installation should be strictly
controlled to avoid contact stress concentration.
Cylindrical roller bearings
1. No outer wall and the inner wall N0000 type cylindrical roller
bearings NU0000 bearing acceptable such large radial load, high
speed limit, do not bind the axial displacement of shaft or
housing, can not accept axial load .
2. Double row tapered roller bearing inner and outer rings with
ribs Cylindrical roller bearings NJ0000 type, NF0000 bearing shaft
or housing can be bound axial displacement in one direction, and
can accept a smaller axial load. NU0000 + HJ0000 type, NJ0000 +
HJ0000 type, NUP0000 type bearings in the axial clearance of
imported bearings shaft or housing areas bondage axial displacement
in both directions. And accept a smaller two-way axial load.
Type cylindrical roller bearings
Cylindrical roller bearings types include: N, NU, NJ,
NF, NUP, NFP, NH (NJ + HJ), NN, NNU, NNF, FC, FCD type
1. N bearing
No outer wall, the inner ring ribs on both sides. Allows the
bearing axis relative to the axial direction between the two
displacement directions. NU type ribs on both sides of the bearing
outer ring, inner ring without ribs. Can allow the shaft between
the bearing seat in the axial displacement in both directions.
Therefore, such a structure is suitable for use as a mobile end
bearings.
2. NU type bearings
Ribs on both sides of the bearing outer ring, inner ring without
ribs. Can allow the shaft between the bearing seat in the axial
displacement in both directions. Therefore, such a structure is
suitable for use as a mobile end bearings.
3. NJ type bearings
Outer sides of wall, inner side with ribs. Can withstand a certain
amount of axial load. NF type outer side has wall, inner sides of
ribs. Also can withstand a certain amount of axial load. Therefore,
such a structure is suitable for positioning the axial direction as
a single bearing.
4. NUP bearings
Outer sides of ribs, the inner side of the band (fixed)
single-wall, while the other side is detachable flat ring. Can
withstand a certain amount of axial load.
5. NN bearings
The outer wall, the inner wall on both sides of the middle of the
wall. Allows the relative bearing between the shaft in the axial
direction of the displacement produced two, NNU type bearing outer
ring ribs on both sides of the middle of the wall, inner wall.
Allows the bearing axis relative to the axial direction between the
two directions of displacement generated. Therefore, such structure
is suitable for swimming-end bearings. The type of bearing retainer
multi-use vehicles solid cage.
Double row cylindrical roller bearings
Double row cylindrical roller bearings simplest definition is
rolling element is a cylindrical roller and is the two side by side
bearing to the heart. Double row cylindrical roller bearings
rolling element and the raceway is in line contact, so it is
relative to the point contact bearings can withstand a greater
load, and the rolling element and ring friction, for high-speed
rotating machinery.
Due to large load capacity, high-speed two features, double row
cylindrical roller bearings use a wide area, the main purposes are:
cranes, large motors, vehicle bearings, generators, machine tool
spindles.
Four cylindrical roller bearings Front codenamed FC, FCD, RY, RX,
RXK type, they are for high-speed, high-temperature, high radial
loads and design.
FC-type
FC-type four cylindrical roller bearing is composed of two outer
and an inner ring composed of two outer sides and the middle has a
wall, inner wall no.
CFD model
CFD-type four-row cylindrical roller bearings are composed of two
cylindrical roller bearings NN combination.
Bearing purposes
Medium-sized motors, locomotives, machine tool spindle, internal combustion engines, generators, gas turbines, gear boxes, rolling mill, vibrating screen and lifting and transport machinery.
Specification
Brand: SKF CKF FAG NSK INA IKO TIMKEN EASE THK A SAHI EZO KOYO NACHI NTN NMB HIKI
Material: GCr15 --------ball bearing steels -----0Cr17Ni12Mo2------stainless steel ------SI3N4---SIN4---ceramics
Internal structure: N,NU,NJ,NF,NUP,NFP,NH(NJ+HJ),NN,NNU,NNF,FC,FCD
Cylindrical roller bearings with cylindrical bore radial clearance:C0,C1,C2,C3,C4,C5
Precision Tolerance: Cylindrical roller bearings can be divided according to accuracy class PO, P6, P5, P4, P2. Accuracy sequentially from low to high Sort
Quality standard: ISO9001:2000
Product Range:
| Principal dimensions | Basic load ratings | Fatigue load limit | Speed ratings | Mass | ||||
dynamic | static | Reference speed | Limiting speed | ||||||
d | D | B | C | C0 | Pu | ||||
mm | kN | kN | r/min | kg |
NU 1014 | 70 | 110 | 20 | 76,5 | 93 | 12 | 6300 | 7000 | 0,62 |
N 214 | 70 | 125 | 24 | 137 | 137 | 18 | 6000 | 6300 | 1,15 |
NJ 214 | 70 | 125 | 24 | 137 | 137 | 18 | 6000 | 6300 | 1,15 |
NU 214 | 70 | 125 | 24 | 137 | 137 | 18 | 6000 | 6300 | 1,15 |
NUP 214 | 70 | 125 | 24 | 137 | 137 | 18 | 6000 | 6300 | 1,20 |
NJ 2214 | 70 | 125 | 31 | 180 | 193 | 25,5 | 6000 | 6300 | 1,55 |
NU 2214 | 70 | 125 | 31 | 180 | 193 | 25,5 | 6000 | 6300 | 1,50 |
NUP 2214 | 70 | 125 | 31 | 180 | 193 | 25,5 | 6000 | 6300 | 1,55 |
N 314 | 70 | 150 | 35 | 236 | 228 | 29 | 4800 | 5600 | 2,75 |
NJ 314 | 70 | 150 | 35 | 236 | 228 | 29 | 4800 | 5600 | 2,80 |
NU 314 | 70 | 150 | 35 | 236 | 228 | 29 | 4800 | 5600 | 2,75 |
NUP 314 | 70 | 150 | 35 | 236 | 228 | 29 | 4800 | 5600 | 2,85 |
NJ 2314 | 70 | 150 | 51 | 315 | 325 | 41,5 | 4800 | 5600 | 4,05 |
NU 2314 | 70 | 150 | 51 | 315 | 325 | 41,5 | 4800 | 5600 | 4,00 |
NUP 2314 | 70 | 150 | 51 | 315 | 325 | 41,5 | 4800 | 5600 | 4,15 |
N 414 | 70 | 180 | 42 | 229 | 240 | 30 | 4300 | 5000 | 5,20 |
NJ 414 | 70 | 180 | 42 | 229 | 240 | 30 | 4300 | 5000 | 5,35 |
NU 414 | 70 | 180 | 42 | 229 | 240 | 30 | 4300 | 5000 | 5,25 |
NU 1015 | 75 | 115 | 20 | 58,3 | 71 | 8,5 | 6700 | 10000 | 0,74 |
N 215 | 75 | 130 | 25 | 150 | 156 | 20,4 | 5600 | 6000 | 1,25 |
NJ 215 | 75 | 130 | 25 | 150 | 156 | 20,4 | 5600 | 6000 | 1,30 |
NU 215 | 75 | 130 | 25 | 150 | 156 | 20,4 | 5600 | 6000 | 1,25 |
NUP 215 | 75 | 130 | 25 | 150 | 156 | 20,4 | 5600 | 6000 | 1,30 |
NJ 2215 | 75 | 130 | 31 | 186 | 208 | 27 | 5600 | 6000 | 1,60 |
NU 2215 | 75 | 130 | 31 | 186 | 208 | 27 | 5600 | 6000 | 1,60 |
NUP 2215 | 75 | 130 | 31 | 186 | 208 | 27 | 5600 | 6000 | 1,65 |
N 315 | 75 | 160 | 37 | 280 | 265 | 33,5 | 4500 | 5300 | 3,30 |
NJ 315 | 75 | 160 | 37 | 280 | 265 | 33,5 | 4500 | 5300 | 3,35 |
NU 315 | 75 | 160 | 37 | 280 | 265 | 33,5 | 4500 | 5300 | 3,30 |
NUP 315 | 75 | 160 | 37 | 280 | 265 | 33,5 | 4500 | 5300 | 3,45 |
NJ 2315 | 75 | 160 | 55 | 380 | 400 |