Zhejiang Canaan Kaixinlong Technology Co., Ltd. |
Verified Suppliers
|
|
Overview of the machine:
Powder Capsule Filling Machine High Speed Capsule Filling Machine Hard Capsule Filling Machine
Technical parameters:
Output | 1500Capsules/min |
No.of segment bores | 11 |
Suitable fof capsule | 00#-5# |
Total power | 8Kw(Standard configuration) |
Overall weight | 1400Kgs |
Overall diemensions | 1230mm×1175(+382)mm×1955mm |
Noise | ≤75DB(A) |
Pressure | 0.4 ~ 0.7Mpa |
Air consumption | ≤6m³ |
Vacuum | -0.03 ~ -0.06Mpa |
Filling error | ±2.5%~±5% |
The machine may make technical improvements without prior notice, and the attached picture shows the options that may be offered.
Finished capsule discharge station:
Use The finished capsules will be pushed out for collection. Principle The main component of the device is a discharge top rod that can
reciprocate up and down. When the upper and lower modules carrying
the closed capsule are rotated above the exit station and stopped,
the capsule is pushed out of the module hole. The capsule was then
blown into the outgoing hopper and slid into the stock barrel. |
The smooth drive system:
Indexing box | Transmission part | Inside groove cam |
Closed station turntable:
1.Use the imported silicone sealing ring to reduce the condition
that the powder is brought into the turntable due to the expansion
of the movement axis, and smooth operation, high accuracy;
2.It solves the complicated problem of installing and dismantling
the mold, reduces the labor intensity of the staff, and strengthens
the service life of the station rotary table.