|
[China]
Trade Verify
Address: Zone C No. 2, Wandong Intelligent Manufacturing Industrial Park, 999 Wentao Road, Ruian Economic Development Zone, Ruian City.Zhejiang.China
Contact name:
Zhejiang Canaan Kaixinlong Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Overview of the machine:
High-Tech Pharmaceutical Machine Pharmaceutical Machine Gel Hard Capsule Filling Machine Filling Machine
Technical parameters:
| Output | 2500Capsules/min |
| No.of segment bores | 18 |
| Suitable fof capsule | 00#-5# |
| Total power | 8Kw(Standard configuration) |
| Overall weight | 1650Kgs |
| Overall diemensions | 1230mm×1175(+382)mm×1955mm |
| Noise | ≤75DB(A) |
| Pressure | 0.4 ~ 0.7Mpa |
| Air consumption | ≤9m³ |
| Vacuum | -0.03 ~ -0.06Mpa |
| Filling error | ±2.5%~±5% |
The machine may make technical improvements without prior notice, and the attached picture shows the options that may be offered.
Cleaning station:
Use The cleaning unit cleans the module for access to the next cycle. Principle When the upper and lower modules are dragged under the main working
plate and parked at the cleaning station, they are placed at the
gap of the cleaning device. At this time, the compressed air is
opened, and the powder in the mold hole and the broken skin are
blown out of the mold hole from the lower direction of the lower
module. The vacuum suction system placed above the mold hole draws
it into the vacuum cleaner to keep the mold hole clean and to
facilitate the next cycle operation. |  |
 |  |  |
| Capsule polisher(option) | Capsule polisher with sorter(option) | Vertical capsule polisher(option) |
1.Capsule special polishing equipment, can remove the dust and static electricity on the surface of the capsule, improve the surface smooth. 2.Using infinite speed regulating motor, hopper height adjustable. | 1.In addition to dust and polishing, eliminate static electricity, can also automatically remove the loading, shell, debris and body separation capsules. 2.Using frequency conversion speed regulation, sensitive and reliable speed can withstand a large start torque, synchronous belt output power to achieve low noise operation.
| 1.With capsule polishing, sorting, and improved functions, leaving high space for connecting to subsequent devices. 2.The entrance and exit can be adjusted by 360° circumference to facilitate production and save floor space. 3.The use of fast assembly connection structure makes the disassembly and installation of the machine more convenient and quick. |
Easy to remove the hopper:
 | The old hopper, loosen the hand wheel on the supporting column when disassembly and cleaning, and stretch on the long pressure spring in the column. Most of the hopper must be extended out of the upper Plexiglass to be removed. During the installation, the pressure spring needs to be squeezed to the bottom before tightening the hand wheel, and the employees need to spend a lot of effort to operate. |
 | A screw was added to the supporting post, the screw passed through the panel, the top connecting the hopper support, and the motor and turbine box were installed at the bottom. During hopper disassembly and installation, the whole lifting process can be operated on the PLC operation panel. Due to the use of a single screw support, the work when there is a slight shaking phenomenon. |
 | The split structure is directly fixed on the lower plane of the roof, with simple structure, stable and reliable when working, and convenient hopper disassembly. Release the fast interface of the material cylinder, then loosen the four screws on the hopper, then rotate out the small pin on the paddle, you can horizontally pan out of the filling part. |
