|
[China]
Trade Verify
Address: Zone C No. 2, Wandong Intelligent Manufacturing Industrial Park, 999 Wentao Road, Ruian Economic Development Zone, Ruian City.Zhejiang.China
Contact name:
Zhejiang Canaan Kaixinlong Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
Automatic High-Speed Rotary Tablet Press Tablet Production Equipment Tablet Press For Medical Purposes
Technical parameters:
| Model | GZPK-26 | GZPK-32 | GZPK-40 |
| Capacity (Tablets/h) | 160000 | 210000 | 260000 |
| No.of station | 26 | 32 | 40 |
| Max.tablet diameter(mm) | 25 | 16 | 13 |
| Rotation speed (r/min) | 11-102 | 11-105 | 11-105 |
| Main.tablet diameter(KN) | 100 | 80 | 80 |
| Pre-pressure(KN) | 20 | 20 | 20 |
| Main.filling depth(mm) | 20 | 16 | 16 |
| Dia.of.die(mm) | 38.1 | 30.16 | 24.01 |
| Length of punch(mm) | 133.6 | 133.6 | 133.6 |
| Total power(Kw) | 7.5 | ||
| Overall weight(Kg) | 1800 | ||
| Overall diemensions(mm) | 1170×1000(+530)×1950 | ||
| Noise | ≤75DB(A) | ||
The machine may make technical improvements without prior notice, and the attached picture shows the options that may be offered.
Core Components:
【 High precision punching plate combination 】 | The processing technology of punching die holes of other
manufacturers is normally cut by boring machine, because this
processing method leads to the poor finish of the middle plate
hole, and the later stage and the middle die can only be
interference fit, resulting in the difficulty of entering and
exiting the hole of the middle die. The company's middle die holes in the boring machine cutting, and
then each hole grinding, at the same time with the coordinate
detection equipment for hole detection, to ensure the finish and
accuracy of the hole. The processing cost is much higher. The punch
plate is the most core workpiece of the tablet press, and its
accuracy can fully represent the overall accuracy of the high-speed
tablet press. |
【 Free hand change 】 | Remove and assemble the mold by hand without borrowing any tools.
The design and development ensure that the medium die hole of the
plate of the high speed tablet press will not be deformed for a
long time. Other manufacturers because of borrowing tools to knock on the mold
to complete the assembly and disassembly, but borrowing tools to
knock on the mold is easy to extrude metal chips, and labor
intensity, low production efficiency, waste a lot of time, while
years of knocking on the mold, so that the hole becomes elliptical,
precision loss, up and down punch with the mold precision problems. |
The machine [Convex-concave center mold locking structure] |
Comparable [Tapered center mold locking structure ] |
| The contact surface of the top wire of the center punch plate is convex-concave, and the convex-concave surface of the top wire and the ring groove of the center die make a horizontal fit to tighten (face-to-face contact), which ensures that the center die won't be taken out of the tableting machine for a long period of time, which is extremely high in safety and lowest in risk. | The contact surface of the top wire of the center die of other manufacturers in the same industry adopts the conical surface (point contact), and the top wire adopts the way of side top with the center die, and this kind of side slanting top in the working process of the tablet press because of the sticking punch or astringent punch and so on, there is the center die in the position of the tablets by the downward punching out of the holes of the center die, and then the tablets will be out of the stopper bar, the forcing of the feeder, and other devices all hit the broken, crash the car and such serious accidents, which will cause a long time to stop the production of the user, waiting for the spare part to repair the serious losses. |
