Hangzhou Kaige Membrane Technology Co.,Ltd |
|
First. product structure and characteristics
Enhanced PVDF composite hollow fiber membrane has the following features:
1, high strength
Enhanced PVDF composite hollow fiber membrane with unique support layer the membrane technology, so that the tensile strength and compressive strength is far more than the average of the hollow fiber membrane, the rally than 50 KG, more by image called "pull continuously film".
2, fight pollution good performance
Enhanced PVDF composite hollow fiber membrane with PVDF alloy film as the filter layer, its ultra smooth membrane surface characteristics and unique charge performance, make its have super fight pollution performance.
3, super flux
Enhanced PVDF composite hollow fiber membrane using relatively independent special support layer technology and PVDF alloy membrane filtration layer technology, its special filter layer porosity higher structure, make its have large water flux performance.
4 and retaining good performance
Enhanced PVDF composite hollow fiber membrane using PVDF alloy film as the filter layer, its special internal and external density double cortex structure, make its have superior interception performance.
5, cleaning flux restored
Enhanced PVDF composite hollow fiber membrane using PVDF alloy film as the filter layer, its special internal and external density double cortex structure, make pollutants can only stay in the outer surface of the film, don't go into a large network of film hole, and hence it is very easy to clean, clean flux restored.
6, enhanced PVDF composite membrane module can modular design, compact structure, cover an area of small, easy to combination to use.
Second .The product performance parameters
specifications | Model | KG-MBR-6-Co-PVDF | KG-MBR-10-Co-PVDF | KG-MBR-15-Co-PVDF |
Length | 1020 mm | 1523 mm | 15230 mm | |
Wideth | 655 mm | 655 mm | 655 mm | |
Outlet caliber | DN25 | DN25 | DN25 | |
The intake caliber | DN25 | DN25 | DN25 | |
Area | 6 m2 | 10 m2 | 15 m2 | |
Weigh | 6 kg | 10 kg | 15 kg | |
| Shell material | ABS/UPVC | ABS/UPVC | ABS/UPVC |
Hollow fiber membrane material | PVDF | PVDF | PVDF | |
Pore size | 0.1-0.4μm | 0.1-0.4μm | 0.1-0.4μm | |
Inner | 1.0mm | 1.0mm | 1.0mm | |
Outnerr | 2.4mm | 2.4mm | 2.4mm | |
Effluent turbidity | < 1 NTU | < 1 NTU | < 1 NTU | |
Water suspended | < 1 mg/L | < 1 mg/L | < 1 mg/L | |
Lift time | 3-8 years | 3-8 years | 3-8 years | |
The typical process conditions | Temperature tolerance range | 1-40℃ | 1-40℃ | 1-40℃ |
PH value tolerance range | 2-13 | 2-13 | 2-13 | |
Production flow | 2.0~3.0 m3/d | 3.5~5.0 m3/d | 5.0~7.5 m3/d | |
Maximum differential pressure across the membrane | -0.08 MPa | -0.08 MPa | -0.08 MPa | |
Water way | Negative pressure suction | Negative pressure suction | Negative pressure suction | |
Water cycle | Work eight minutes, stop 2 minutes | Work eight minutes, stop 2 minutes | Work eight minutes, stop 2 minutes | |
Chemical sterilization elixir | Sodium hypochlorite | Sodium hypochlorite | Sodium hypochlorite | |
Chemical cleaning cycle | 6-12 monthes | 6-12 Monthes | 6-12 Monthes | |
Chemical cleaning agents | Citric acid/sodium hydroxide | Citric acid/sodium hydroxide | Citric acid/sodium hydroxide | |
1,List all the technical parameters are all standard test under the conditions of the factory inspection value. |