Home Companies Xi'an Kacise Optronics Co., Ltd.

Xi'an Kacise Optronics Co., Ltd.
Active Member

Contact Us

Address: Tangyan South Road, Yanta District, Xi'an, Shaanxi province, China

Phone: 86-029-62929722

Contact name:Mrs. Evelyn

Inquir Now

Xi'an Kacise Optronics Co., Ltd.

City & Province Xi'an Shaanxi
InquireNow

Product Details

GXUS series adjustable long range ultrasonic level sensor price

GXUS series ultrasonic sensors cover a variety of application scenarios in industrial automation. Whether it comes to material handling, mobile equipment, food and beverage, fill level measurement or detection tasks at gates and doorways: they offer solutions for the most different application requirements.

 

Sensors with digital switching outputs or an analog 4-20 mA interface are commonplace. Most sensors can be taught-in or parameterized via an interface and therefore adapted to the respective application.

 

 

GXUS ultrasonic sensor's features

High resolution
Short response time
Small blind zone
Various outputs available: switch, analog or RS232/485 output

 

Parts of detail parameters  

Please contact us for  more information

 

 

 

 

 

General specifications

Sensing range

70 ... 1000 mm; 120...2000mm; 200...3000mm

Standard target plate

100 mm x 100 mm

Transducer frequency

approx.255 kHz

Response delay

approx.125 ms

Indicators/operating means

LED blue

Power on

LED yellow

solid: object in the evaluation range

flashing: program function, object detected

LED red

solid: Error

flashing: program function, no object detected

Electrical specifications

Operating voltage UB

10 ... 30 V DC , ripple 10 %SS

No-load supply current I0

 45 mA

Output

Output type

1 analog output 0-10V or 4…20mA.

Resolution

0.11 mm at max. sensing range

Deviation of the characteristic curve

± 1 % of full-scale value

Repeat accuracy

± 0.1 % of full-scale value

Load impedance

> 1kOhm

Temperature influence

± 1.5 % of full-scale value

Ambient conditions

Ambient temperature

-25 ... 70 °C (-13 ... 158 °F)

Storage temperature

-40 ... 85 °C (-40 ... 185 °F)

Mechanical specifications

Connection type

Device connector M12 x 1 , 4-pin

Protection degree

IP65 (IP66 selectable)

Material

Housing: nickel plated brass 

               or stainless steel

               or plastic

Transducer: epoxy resin/hollow glass sphere mixture;

polyurethane foam

 

Adjusting the evaluation limits

The ultrasonic sensor features an analogue output with two teachable evaluation limits. These are set by applying the supply voltage -UB or +UB to the TEACH-IN input. The supply voltage must be applied to the TEACH-IN input for at least 1 s. LEDs indicate whether the sensor has recognized the target during the TEACH-IN procedure. The lower evaluation limit A1 is taught with -UB, A2 with +UB.

Two different output functions can be set:

1. Analogue value increases with rising distance to object (rising ramp)

2. Analogue value falls with rising distance to object (falling ramp)

Evaluation limits may only be specified within the first 5 minutes after

Power on. To modify the evaluation limits later,

the user may specify the desired values only after a new Power On.

TEACH-IN rising ramp (A2 > A1)

- Position object at lower evaluation limit

- TEACH-IN lower limit A1 with - UB

- Position object at upper evaluation limit

- TEACH-IN upper limit A2 with + UB

TEACH-IN falling ramp (A1 > A2):

- Position object at lower evaluation limit

- TEACH-IN lower limit A2 with + UB