Xi'an Kacise Optronics Co., Ltd. |
Introduction
GXUF-2000 series flow meter usually is used to long-term measure at field. It's easy to use and easy to repairing without cut off the piple,without turn off the fluid.Both the sensor and the host can be installed
on the pipes. The protect grade is Ip68, can be used as calorimeter, if the temperature sensor added
Feature
Parts Parameters in detail | ||
Host part | Theory | Ultrasonic time gap. |
accuracy | ±1% | |
Option method | 4-key keyboard support magnetic rod operation | |
Signal output | 1channel 4~20mA@0.1% current loop back, the maxim load resistor up to 1000ohm, | |
1 channel OCT pulse out put (default pulse width is 200ms, and can be modify between 6 to 1000ms) | ||
1channel relay output(3A@220V) | ||
signal input | 3 channel 4-20mA current loop back @0.1% circuit used to collect Temp. Pressure and liquid level etc. . | |
1 channel mV input use to pt100 for calarimeter | ||
Digital port | Rs485 support Mod-bus protocol and support firmware update | |
Cable | special cable for Rs485 the range up to 1000m | |
Suit pipe | Pipe material | steel, cast iron cement, copper, PVC, Aluminum, glass, etc. |
Inner DN. | 15 ~6000mm | |
Sensor position | It's better the sensor fix at the position of at least 10D far away of upstream, or 5D far away of downstream at least 30D far away from the pump outlet(D is the inner diameter of the pipe). | |
Suit flow | media | water, sea water, waster water, liquid alcohol, beer, gas, oil etc.. |
Temperature | -30~160℃ | |
Turbidity | 10000ppm not so much bubles | |
Flow speed | 0~±10m/s | |
Enrionment | Temperature | Host:-20 ~60℃; sensor:-30 ~160℃ |
Humidity | host:85%RH;Flow sensor:IP68,less than 2m under water | |
Power supply | DC8 ~36V or AC85~265V(optional) | |
Consumption | 1.5W |