|
[China]
Trade Verify
Address: NO.135 YanGang Middle Road,Jintan District, Changzhou City, Jiangsu Province,CHINA
Contact name:Liting
Jiangsu Jinwang Intelligent Sci-Tech Co., Ltd |
|
Verified Suppliers
|
|
|
High Speed Automatic Capping Machine(100ml-1L) 6/8 Capping Heads Pick and Place type
Pick and place type Rotary Capping Machine is used for closing
plastics screw caps, especially for the caps with lock ring. It is
widely used in industries like foodstuff, pharmacy, daily chemical,
cosmetic, fertilizer, etc.
Automatic rotary cappers are designed to handle a wide range of
caps including screw caps, press-on caps, tamper-proof caps,
aerosol over caps, inserts, ROPP caps, twist-off caps onto plastic
and glass containers. Rotary cappers have much higher speed
capabilities than in-line capping machines.
PLC control system, rotary type structure, the machine is with the
function of automatic cap feeding, loading, and closing.
The containers are fed onto the rotary screw capper and are
separated and positioned on individual capping stations. The caps
are presorted and fed on the sliding table of the machine. The
continuously rotating chucks are lowered over the cap to pick up
and secure the caps, then apply the caps to the containers. When
the preset applied torque value is achieved, the magnetic clutch
disengages, the chuck releases the cap and the closed container is
discharged from the machine.
With 6 mechanical hands, the model is suitable for multi-geometry
containers. It dispatches caps at a fast speed without any cap
reversed. Supplying cap system and mechanical hands work together
in phase. When the cap is tightened, bottle and cap standstill
relatively, and the clutch separates immediately so that able and
not apt to be damaged.
Technical parameters:
| 1 | Capping capacity | 6000-8000 bottles/hour |
| 2 | Pass rate | ≥99.5% |
| 3 | Suitable bottle size | Φ40-95mm H80-250mm |
| 4 | Cap size | Φ25-60mm H20-40mm |
| 5 | Cap heads | 6 heads |
| 6 | Air pressure | 0.6-0.8 Mpa |
| 7 | Power source | ～380V/50Hz/4.0KW |
| 8 | Weight | around 1600Kg |
| 9 | Dimensions | 1995×1300×2246mm(L×W×H) |
Bottle Inlet Part
Capping Feeding Part
3. Detection and rejection of no aluminum foil cap
4. The cap sorter
Electric Cabinet
Carbon steel base mounted on adjustable floor levelers for easy alignment
Bearing frame and all surface components manufactured in 304 stainless steel
Magnetic clutch capping heads for screw caps complete with pick & place cap system
Caps in chute photocell, the machine will not work if there are no caps present on the chute
Automatic cap feeder, chute, and applicating head
Electrical socket for optional elevator feed
Safety guarding with interlock devices
Cap change parts complete set to run a different size cap(option)
Cap elevator to load the cap feeder automatically(option)
