PCD blank for tools,PCD blank for diamond cutting tools

PCD blank for tools,PCD blank for diamond cutting tools(julia#moresuperhard.com)

Skype:julia1989869

PCD Blanks provide the hardness and abrasion resistance of natural diamond,combined with the toughness of tungsten carbide. The work piece processed by PCD has good surface finish and no need being ground.It is an ideal tool material for its long life and high efficiency.

PCD is widely used for the machining of non-ferrous metals and alloys,such as aluminum,copper,aluminum / gray iron composites, as well as nonmetallic materials such as wood,chipboard,ceramics,plastic,rubber etc,where high abrasion resistance and good surface finish are required.

Advantages:

1.Longer tool life

2.Uniform surface finish

3.Reduced machine down time

4.High improved workpiece quality and excellent dimensional control

5.Increase productivity

6.High material removal rate

7.Low cost per piece

8.The tool life of a PCD cutting edge is usually 50 to 250 times greater than that obtained with conventional tungsten carbide cutting tools.

The products are available in 5μm,10μm and 25μm. 5μm is used for superfinish. 10μm is used to finish machining. 25μm is used to rough finish.

Detailed information about PCD of grit size: 5μm

Application: Aluminum,Copper,Precious Metals,Wood Composites and Plastic. The advantage is excellent surface finish.

Detailed information about PCD of grit size: 10μm

Application: <14% Si/ Al Alloys,copper Alloys,Graphite and Graphite Composites,Wood Composites,Green ceramics and carbides. The advantage is excellent wear resistance and good surface finish.

Detailed information about PCD of grit size: 25μm

Application: >14% Si/ Al Alloys,Metal Matrix Composites, Bi-Metals (aluminum/ cast iron),Sintered Ceramics and Carbides,Other highly abrasives materials. The advantage is long life and extremely high wear resistance.

We can supply all kinds of shapes such as round,square,triangle.

As for the round shape,we can supply the outside diameter 38mm,44mm,51mm and 52mm.