Power Transformer Mold Cleaning Agent Chemical For Elecric Insulation

Power Transformer Mold Cleaning Agent , Electrical Insulation Chemical For Elecric Insulation

Electrical Insulation Transfomers Moulds Cleaning Agent for All Insulators IRON or Steel Moulds

TDS:

Cleaning System:

Cleaning agents for electrical insulation transformer molds can vary depending on the specific materials being used and the type of contaminants that need to be removed. Here are some general considerations and options for cleaning agents:

Compatibility: The cleaning agent should be compatible with the materials being cleaned and should not cause damage or degradation to the molds or insulators. It is important to choose a cleaning agent that is specifically designed for use with electrical insulation materials.

Type of Contaminants: The type of contaminants that need to be removed will depend on the specific application, but may include dirt, dust, oil, grease, or other residues. The cleaning agent should be effective at removing these contaminants without leaving behind any residue or damaging the molds.

Safety: The cleaning agent should be safe to use and handle, and should not pose any health or safety risks to workers or the environment.

Environmental Impact: The cleaning agent should be environmentally friendly and should not contain any hazardous or toxic substances.

Some potential cleaning agents for electrical insulation transformer molds may include:

Water-based cleaning agents: Water-based cleaning agents are often effective at removing dirt and dust from molds and insulators. They are also typically environmentally friendly and safe to handle.

Solvent-based cleaning agents: Solvent-based cleaning agents can be effective at removing oil, grease, and other residues from molds and insulators. However, they may be more hazardous to handle and may have a higher environmental impact.

Alkaline cleaning agents: Alkaline cleaning agents can be effective at removing stubborn contaminants from molds and insulators. However, they may be more corrosive and may require additional safety precautions.

Overall, the choice of cleaning agent for electrical insulation transformer molds will depend on the specific materials being used and the type of contaminants that need to be removed. It is important to choose a cleaning agent that is effective, safe, and environmentally friendly, and to follow all recommended safety procedures and guidelines when using the cleaning agent.

JT 6102 cleaning agent Product
For cleaning the oil stains / particles on the metal body of the product Application
Composition Composition / Information: Mixture   General composition: Organic acid: 0-20% Organic amine: 10-30% Other additives: 0-5% Water: allowance
Avoid contacting with eyes and skin. Wear protective glasses and gloves when handling. Inhalation of steam can cause nausea , operate in a ventilated place, wear a breathing protector.   Storage note: Sealed in a container, indoor storage at room temperature 0-40°C, avoid extreme hypothermia, sun exposure and rain, keep away from heat and fire sources and store separately from oxidants and acids.   Handling matters needing attention: prevent falling and collision.

Producing Line: