|
[China]
Trade Verify
Address: Room 606, Donghong International Plaza, No. 113 Chebei Road, Tianhe District, Guangzhou, China
Contact name:Sales Manager
jiangte insulation composite |
|
Verified Suppliers
|
|
|
ELECTRICAL INSULATORS OF CASTING IMPREGNATION EPOXY RESIN COMPOUND
MSDS:
1. IDENTIFICATION
Commodity name: JT 8100B Epoxy Hardener/ Aradur
Recommended use of the chemical and restrictions on use: For industry use only.
Company Name: HUBEI JIANGTE INSULATION COMPOSITE CO., LTD.
Add: Room219 Zhanghua Road(N), EDA Qianjiang City, Hubei Province, China
Tel:+86-728-6201068
Fax:+86-728-6202066
Zip code:433132
2. HAZARDS IDENTIFICATION
Risk of serious damage to eyes.
May cause sensitization by inhalation and skin contact.
3. COMPOSITON INFORMATION ON INGREDIENT
| Chemical Name | CAS No. | Content(%) |
| Methyl tetrahydrophthalic Anhydride | 11070-44-3 | 100 |
4. FIRST AID MEASURES
A. Eye contact
- Do not rub your eyes.
- Immediately flush eyes with plenty of water for at least 15minutes and call a doctor/physician.
B. Skin contact
- Flush skin with plenty of water for at least 15minutes while removing contaminated clothing and shoes.
- Laundering enough contaminated clothing before reuse.
- Go to hospital immediately if symptoms(flare, irritate) occur.
- Wash thoroughly after handling.
C. Inhalation contact
- When exposed to large amounts of steam and mist, move to fresh air.
- Take specific treatment if needed.
D. Ingestion contact
- About whether I should induce vomiting. Take the advice of a doctor.
- Rinse your mouth with water immediately.
E. Delayed and immediate effects and also chronic effects from short and long term exposure
- Not available
F. Notes to physician
- Notify medical personnel of contaminated situations and have them take appropriate protective measures.
5. FIRE-FIGHTING MEASURES
A. Suitable (Unsuitable) extinguishing media
- Dry chemical, carbon dioxide, regular foam extinguishing agent, spray.
- Avoid use of water jet for extinguishing.
B. Specific hazards arising from the chemical
- Not available
C. Special protective actions for firefighters
- Notify your local firestation and inform the location of the fire and characteristics hazard.
- Using a unattended and water devices in case of large fire and leave alone to burn if you do not imperative.
- Avoid inhalation of materials or combustion by-products.
- Do not access if the tank on fire.
- Use appropriate extinguishing measure suitable for surrounding fire.
- Keep containers cool with water spray.
- Vapor or gas is burned at distant ignition sources can be spread quickly.
6. ACCIDENTAL RELEASE MEASURES
A. Personal precautions, protective equipment and emergency procedures
- Must work against the wind, let the upwind people to evacuate.
- Move container to safe area from the leak area.
- Remove all sources of ignition.
- Do not direct water at spill or source of leak.
- Avoid skin contact and inhalation.
B. Environmental precautions
- Prevent runoff and contact with waterways, drains or sewers.
- If large amounts have been spilled, inform the relevant authorities.
C. Methods and materials for containment and cleaning up
- Large spill : Stay upwind and keep out of low areas. Dike for later disposal.
- Notification to central government, local government. When emissions at least of the standard amount
- Dispose of waste in accordance with local regulation.
- Appropriate container for disposal of spilled material collected.
- Small leak: sand or other non-combustible material, please let use absorption.
- Wipe off the solvent.
- Dike for later disposal.
- Prevent the influx to waterways, sewers, basements or confined spaces.
7. HANDLING AND STORAGE
A. Precautions for safe handling
- Wash thoroughly after handling.
- Avoid direct physical contact.
- Avoid contact with incompatible materials.
- Refer to Engineering controls and personal protective equipment.
- Do not inhale the steam prolonged or repeated.
B. Conditions for safe storage, including any incompatibilities
- Do not use damaged containers.
- Do not apply direct heat.
- Save applicable laws and regulations.
- Avoid direct sunlight.
- Keep in the original container.
- Collected them in sealed containers.
- Do not eat, drink or smoke when using this product.
- Store away from water and sewer.
8. OPERATION DISPOSAL AND STORAGE
Note: closed/sealed operation, provide good natural ventilation condition. The operator must go through specialized training, strictly follow the operating rules. We suggest that the operating personnel wearing Self suction filtering type dust mask, and wearing protective chemical safety glasses.
Storage note: dry and ventilated
TDS:
| ||
|
Applications:
For medium and high voltage indoor transformer,electrical insulators, such as switches and electrical parts, etc
Processing methods:
Conventional vacuum self gravity casting
Product data(Guideline values) *
JT 8068-1 A Liquid and Solvent free modified epoxy resin
| TYPICAL VALUES* |
Viscosity @ 25℃, mPa.s [ISO 12058] .................................................................. 1,500-3,000 Epoxy value, equiv/g [ISO 3001] .............................................................................0.45-0.51 Density @ 25℃ , g/cm3 [ISO 1675] ........................................................................1.13--1.15 Vapor pressure @20°C, pa (knudsen) ...........................................................................<0.01 @60°C, pa(knudsen) ..............................................................................<0.5 Storage life @ 25℃ (sealed container), month ……………………………………………………………..12 |
Remark:In order to prevent the absorption of moisture,please keep epoxy resin in sealed container and storage under normal temperature (about 20 to 25℃).
JT 8068-1 B Modified liquid Epoxy hardener
| TYPICAL VALUES* |
Viscosity @ 25℃, mPa.s [ISO 12058] ............................................................................50-80 Vapour Pressure @ 20℃, mbar( Knudsen)....................................................................Ca.0.5 @ 60℃,mbar(Knudsen) .....................................................................Ca.10 Density @ 25℃ , g/cm3 [ISO 1675] .........................................................................1.19-1.22 Storage life @ 25℃ (sealed container), month …………………………………………………………….12 |
Remark:It may be crystallized when stored at low temperature place. After heating to 60℃, crystal can
be eliminated; JT8068-1B contains accelerator. Prolonged storage at high embient temperatures will result in an undesirable increase in its viscosity and impairs the reactivity of casting resin system.
Process viscosity:
