|
[China]
Trade Verify
Address: Room 606, Donghong International Plaza, No. 113 Chebei Road, Tianhe District, Guangzhou, China
Contact name:Sales Manager
jiangte insulation composite |
|
Verified Suppliers
|
|
|
Flame Retardant Transformer Parts Liquid Transparent Epoxy Resin With Hardener with Casting Machine and Oven
Product TDS:
JT 8008A Epoxy Resin 100 pbw
JT 8008B Epoxy Hardener 80 pbw
Here is some information that may be included in the Technical Data Sheet (TDS) for JT 8008A Epoxy Resin and JT 8008B Epoxy Hardener:
Chemical Composition: JT 8008A Epoxy Resin is a bisphenol A type epoxy resin, while JT 8008B Epoxy Hardener is a modified polyamide resin. The TDS may provide additional information about the specific chemical composition of the products.
Mixing Ratio: The recommended mixing ratio for JT 8008A Epoxy Resin and JT 8008B Epoxy Hardener is 100 parts by weight (pbw) of resin to 80 pbw of hardener. The TDS may provide additional information about the mixing process and recommended equipment.
Physical Properties: JT 8008A Epoxy Resin has a viscosity of approximately 10,000-15,000 mPa.s at 25°C, while JT 8008B Epoxy Hardener has a viscosity of approximately 1,000-2,000 mPa.s at 25°C. The TDS may provide additional information about the physical properties of the products, such as density and curing time.
Electrical Properties: JT 8008A Epoxy Resin and JT 8008B Epoxy Hardener are both excellent electrical insulators. The TDS may provide additional information about the electrical properties of the products, such as dielectric strength and electrical conductivity.
Application and Usage: JT 8008A Epoxy Resin and JT 8008B Epoxy Hardener are typically used for electrical insulation applications, such as potting and encapsulation of electronic components. The TDS may provide additional information about the recommended application and usage of the products, such as recommended curing conditions and post-curing requirements.
Health and Safety: The TDS may include information about the health and safety hazards associated with the products, such as recommended personal protective equipment, first aid measures, and emergency procedures.
Overall, the TDS for JT 8008A Epoxy Resin and JT 8008B Epoxy Hardener can provide valuable information about the properties, performance, and safety of the products, and can help to ensure the appropriate use and handling of the products.
Product MSDS:
1. IDENTIFICATION
Commodity name: JT 8054A Modified epoxy resin
Company Name: HUBEI JIANGTE IN8
Fax:+86-728-6202066
Zip code:433132
2. HAZARDS IDENTIFICATION
Irritating to eyes and skin.
May cause sensitization by skin contact.
Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
3. COMPOSITON INFORMATION ON INGREDIENT
| Chemical Name | CAS No. | Content(%) |
| 4,4'-(1-methylethylidene)bisphenol polymer with (chloromethyl)oxirane | 25068-38-6 | >90.0 - <100.0 |
| Poly(propylene glycol) | 25322-69-4 | >0.0 - <10.0 |
4. FIRST AID MEASURES
A. Eye contact
- Do not rub your eyes.
- Immediately flush eyes with plenty of water for at least 15minutes and call a doctor/physician.
B. Skin contact
- Flush skin with plenty of water for at least 15minutes while removing contaminated clothing and shoes.
- Laundering enough contaminated clothing before reuse.
- Go to hospital immediately if symptoms(flare, irritate) occur.
- Wash thoroughly after handling.
C. Inhalation contact
- When exposed to large amounts of steam and mist, move to fresh air.
- Take specific treatment if needed.
D. Ingestion contact
- About whether I should induce vomiting. Take the advice of a doctor.
- Rinse your mouth with water immediately.
E. Delayed and immediate effects and also chronic effects from short and long term exposure
- Not available
F. Notes to physician
- Notify medical personnel of contaminated situations and have them take appropriate protective measures.
5. FIRE-FIGHTING MEASURES
A. Suitable (Unsuitable) extinguishing media
- Dry chemical, carbon dioxide, regular foam extinguishing agent, spray
- Avoid use of water jet for extinguishing
B. Specific hazards arising from the chemical
- Not available
C. Special protective actions for firefighters
- Notify your local firestation and inform the location of the fire and characteristics hazard.
- Using a unattended and water devices in case of large fire and leave alone to burn if you do not imperative.
- Avoid inhalation of materials or combustion by-products.
- Do not access if the tank on fire.
- Use appropriate extinguishing measure suitable for surrounding fire.
- Keep containers cool with water spray.
- Vapor or gas is burned at distant ignition sources can be spread quickly.
6. ACCIDENTAL RELEASE MEASURES
A. Personal precautions, protective equipment and emergency procedures
- Must work against the wind, let the upwind people to evacuate.
- Move container to safe area from the leak area.
- Remove all sources of ignition.
- Do not direct water at spill or source of leak.
- Avoid skin contact and inhalation.
B. Environmental precautions
- Prevent runoff and contact with waterways, drains or sewers.
- If large amounts have been spilled, inform the relevant authorities.
C. Methods and materials for containment and cleaning up
- Large spill : Stay upwind and keep out of low areas. Dike for later disposal.
- Notification to central government, local government. When emissions at least of the standard amount
- Dispose of waste in accordance with local regulation.
- Appropriate container for disposal of spilled material collected.
- Small leak: sand or other non-combustible material, please let use absorption.
- Wipe off the solvent.
- Dike for later disposal.
- Prevent the influx to waterways, sewers, basements or confined spaces.
7. HANDLING AND STORAGE
A. Precautions for safe handling
- Wash thoroughly after handling.
- Avoid direct physical contact.
- Avoid contact with incompatible materials.
- Refer to Engineering controls and personal protective equipment.
- Do not inhale the steam prolonged or repeated.
B. Conditions for safe storage, including any incompatibilities
- Do not use damaged containers.
- Do not apply direct heat.
- Save applicable laws and regulations.
- Avoid direct sunlight.
- Keep in the original container.
- Collected them in sealed containers.
- Do not eat, drink or smoke when using this product.
- Store away from water and sewer.
8. OPERATION DISPOSAL AND STORAGE
Note: closed/sealed operation, provide good natural ventilation condition. The operator must go through specialized training, strictly follow the operating rules. We suggest that the operating personnel wearing Self suction filtering type dust mask, and wearing protective chemical safety glasses.
Storage note: dry and ventilated
9. PHYSICAL AND CHEMICAL PROPERTIES
| -Appearance | |
| a. Appearance | Liquid(Viscous liquid) |
| b. Color | Transparent |
| Odor | Not data available |
| -Odor threshold | Not data available |
| -PH | 7 |
| -Melting point/Freezing point | unapplied (liquid in room temperature) |
| -Initial Boiling Point/Boiling Ranges | > 200 ℃ |
| -Flash point | > 180 ℃ |
| -Evaporation rate | Not data available |
| -Flammability(solid, gas) | Not data available |
| -Upper/Lower Flammability or explosive limits | Not data available |
| -Vapour pressure | < 0.01Pa (at 20℃) |
| -Solubility | about 0.009 kg/㎥ (at 23℃) |
| -Vapour density | Not data available |
| -Specific gravity(Relative density) | ~1.15g/cm3 |
| -Autoignition temperature | Not data available |
| -Decomposition temperature | Not available |
| -Viscosity | 3000~8000 mPa.s(at 25℃) |
Clients Products:
Related Equipment:
