Tanker pneumatic conveying system
Pneumatic conveying is a flow in the pipeline transportation of
materials, the device is designed specifically for canned auto
discharge configuration will use the device, the device can greatly
reduce the discharge time, exponentially improve the effectiveness,
which uses compensating pipe in the nozzle to accelerate the flow
and material sent to the storage silos, pipelines, air, material
separation warehouse roof dust collector.
Second, the device features:
1 Can be long-distance transmission, the freedom to choose through
the fork and middle unloader, conveyor discharge point, a tanker
can be sent to multiple discharge points, more than one tanker can
also be sent to a discharge point.
2 tanker and spherical injector conveying pipe, turbocharger, fork,
separation unloader, material handling, transportation and material
pipe installation can be fixed along the plant pillars, effective
use of space, small footprint, easy layout .
3 from the tanker to the storage compartment to achieve automatic
control, to ensure the system's reliability.
4 air and materials, pipes, in suspension, and low-speed
transmission, so conveying pipe less wear, deformation of the
material is generally not broken.
Because the low-speed dense phase conveying, solid and gas is high,
air consumption, save energy.
Piped into the discharge port closed, the discharge point is
equipped with exhaust filter device ---- filter dust collector,
pulse cleaning dust, the entire device sealing performance, no
leakage of dust, conducive to workshop environmentally friendly.
The device can transport all kinds of materials. Example: casting
materials --- sand, coal, clay, lime powder, quartz sand, steel
shot and chemical materials: PVC pulverized coal, nylon plastic
pellets, cement, alkali mixture. However, the granularity of the
object to be transported should be <3mm powder, the temperature
should not exceed 200C, the water content does not exceed 10%.
Fourth, the basic technical parameters:
Spherical injector Model: QS-300/100
Spray patterns: Fluidization
Production: 5m -100m / h
Conveying diameter: seamless steel pipe 76 * 4-168 * 8
Requirements of the gas supply pressure: 0.6Mpa
Conveying the use of pressure: 0.25Mpa-0.4Mpa
Air consumption: the 1 m materials / the 20N m free air (depending
on the material, feed tube distance)
Conveying distance: 500m
Transport height: 50m
Note: This device is the main configuration tanker transport
equipment, tanker owned compressed air device, or without
compressed air device, the device is equipped qi piping, can easily
be connected with the tanker. The transport unloading speed can be
increased more than doubled.