Function and Introduction There are two kinds of buffers, one is long side buffer, the other
is short side buffer. The modules will be temporarily store in this
machine first until later modules finish process, which can promote
efficiency. 1. Modules short in and short out, long in and long out, short in
and long out, long in and short out. 2.Height of transmission is 960±50mm.( customize according to
client requirement) 3. Method of transmission: roller wheel 4.Storage layer8layers(before laminator15layers(after laminator) 5. It takes layer by layer method for storage. 6. Thematerial of storage part surface is thermoplastic pipes,
which is suitable for any glass. Main parameter Modules format:(1580-2000)mm×(800-1000)mm Operator online:none Weight:around300kg Rated power(kw):2.5kw Air consumption(L/min):none Pressure(MPa):none Connection format:none Noise(dbA):<72db Dimension(LXWXH):2200mmx1400mmx2300mm Environmental requirement:Temperature 5-50℃. humidity:<75% without dew formation. Advantage 1. The machine uses pinion and rack transmission mechanism driven
by servo motor, and guided by linear rail, with advantages such as
precise positioning and stable running. 2. The main body of the machine is equipped with safety fence to
ensure the safety of operation. 3. there is detection photoelectric protection for feedstock and
discharge in case of broken pieces caused by interfere between
modules raise and guard bar. 4. The machine is full-automatic requiring no human interference. 5.The bracket of module storage uses roller wheels, and the section
contacted with module wrapped by thermoplastic pipeswhich is
suitable for coated glass.
|