Compact Structure High Quality Floating Flake Fish Feed Production Line 10 - 50 kg/h Capacity

Automatic Flake Fish Feed Machine Stainless Steel Floating Fish Feed Machine
 
 

Introduction
 

The drum scraper dryer, also known as the drum dryer, is an internal heating conduction type rotary drying device. The wet material obtains heat transferred by heat conduction on the outer wall of the drum to remove moisture to achieve the required moisture content. In the drying process, heat is transferred from the inner wall of the drum to the outer wall of the drum, and then passes through the film. The heat efficiency is high and can be continuously operated, so it is widely used for drying liquid materials or strip materials. The liquid material completes the whole process of filming, dewatering, scraping, and obtaining a dried product in one rotation cycle of the drum. Therefore, in the drum drying operation, the product of the expected moisture content and the corresponding yield can be obtained by adjusting parameters such as feed concentration, film thickness, heating medium temperature, drum rotation speed and so on. Due to the structural and operational characteristics of the drum dryer, it is more suitable for paste and viscous materials.

According to user conditions and experience, apple clay materials are often carried out using a roller scraper dryer. The roller is made of welded structure. The proper heat treatment process can greatly improve the thermal stability of the welded part. The hard chrome plating on the cylinder surface can improve not only the corrosion resistance of the cylinder, but also the hardness of the cylinder surface and increase the wear resistance. In addition, it can improve the service life of the cylinder. The equipment adopts double drum structure, on the one hand, it can reduce the installed power of the equipment under the same dry area, on the other hand, the space between the two cylinders can be used to accommodate the slurry, which is beneficial to the selection of the feeding method; The thickness of the cloth is controlled by adjusting the gap between the two cylinders; the synchronous rotation of the two cylinders is controlled by two co-directional gears.

Paramenters

Raw material

Corn, maize, grass, grains, molasses and others, with the feeder of frequency and speed control, the uniform feeding can be achieved.

 Details
 

Packing and shipping
 

Packing: inside plastic bag, outside wooden case for Flake Fish Feed Machine (Based on the customers' need adopt the wooden case or wooden pellets, etc.).

Transportation: shipping, train, express or upon clients' demands.

Our Services

1. Free consultation service before, during, and after sales;

2. Free Project planning and design services upon clients' special demands;

3. Debugging and inspecting of equipment until everything is functional before leaving the factory;

4. Overseas installation and training of equipment maintenance and operating personally;

5. Provide basic production techniques and formulas;

6. 1 year complete warranty for Flake Fish Feed Machine.

1. Advantage technology

2. High quality material

3. Tight quality control

4. Accurate maching

5. 7 - 24 hours service