12V - 24V short circuit protection Tamiya male connector Standard
NiMH Battery Charger
Features and Benefits
- Universal Fast and Smart Charger is designed
for charging any 12V-24V NiMH and NiCd Battery Packs.
(10-20 Cells pack)
- 100-240V AC input for worldwide use.
- The charger can cut-off power Automatically by negative delta V IC
when battery pack is fully charge.
- Two current levels, 0.6A and 1.2A, are selectable by a switch for
either higher or lower capacity battery pack.
- For battery pack between 3300mah and 500 mah, please use the low
level switch -- charging rate: 0.6A
- For battery pack over 3300 mAh, please use the high level switch --
charging rate: 1.2A
- Approximate, Charging time( hours) = Battery capacity ( Ah) /
charging current ( A).
- If possible, always choose charging current in 0.6A to slow
charging , which is good for battery and charger service life.
- Protection fuse for over current, short circuit & reverse
polarity protection.
- Charging time can be estimated as the follow:
Charging time ( Hrs ) = 1.2xBattery capacity ( mAh) / Charging
current ( 0.6A or 1.2A )
- One standard Tamiya male connector installed with the charger.
- One set connector adaptor from female tamiya to
Clips is included for charging any battery
packs.
- It is a very smart charger. Just plug it in and wait for the
battery to get charge.
- The charger is designed for fast charging any 24V Nicd and NiMH
battery packs. Ideal for 24V battery pack for E-bike, E-
scooter and hunting light
- Dimension: 1.5"H X 2.36"W X 4.67"L.
- Weight: 0.6LB.
IMPORTANT NOTICE: In order for charger to function properly, please
have temperature sensor connected to the charger at all times. The
actual sensor does not necessarily need to be attached to the
battery, though, while charging battery pack.